Intercooler piping
Thread Starter
Pole Position
Joined: Sep 2007
Posts: 375
Likes: 0
From: FL
Intercooler piping
Just curious where you all got your intercooler piping for 1jz. There a website that sells kits that fairly bolt up? I want mandrel bent pieces so it isn't shrunk around turns. Thanks !
Pole Position
Joined: Jan 2007
Posts: 286
Likes: 0
From: Wisco.
You'll have to go custom to get the fit you are looking for. 1jz's are still somewhat rare to the scene especially in sc's, so there won't be a kit out there that will fit.
You can buy piping kits, but they aren't model specific, they just come with what you SHOULD need and even then you will have to have it cut and welded to your application..
You can buy piping kits, but they aren't model specific, they just come with what you SHOULD need and even then you will have to have it cut and welded to your application..
http://store.racing-solutions.org/bendkits.html They've got the bends, you just need to do a little cutting, fitting and welding.
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
Driver School Candidate
Joined: Sep 2007
Posts: 19
Likes: 0
From: FL
My cold side is 2.5" mandrel bent steel, hot side is 3" mandrel bent aluminum. Cold sides on the single turbo is really easy. Just go down along the frame rail. Minimal bends and it's nice and hidden.
Thread
Thread Starter
Forum
Replies
Last Post
