Notices
SC - 1st Gen (1992-2000)

emblems

Thread Tools
 
Search this Thread
 
Old Aug 6, 2001 | 03:50 PM
  #1  
YuuDawg's Avatar
YuuDawg
Thread Starter
Driver
 
Joined: Jun 2001
Posts: 101
Likes: 0
Default

how are the emblems on the back of the sc's attached? are they glued on or are they bolted on?
Reply
Old Aug 6, 2001 | 04:39 PM
  #2  
CmputerWiz's Avatar
CmputerWiz
Lexus Test Driver
20 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: May 2001
Posts: 1,476
Likes: 1
From: Florida
Default

They're glued on and have little plastic rivets thru the panels. I just used a flat head screwdriver and easily pried down the length of the emblems until they popped off.

SR
Reply
Old Aug 6, 2001 | 10:48 PM
  #3  
YuuDawg's Avatar
YuuDawg
Thread Starter
Driver
 
Joined: Jun 2001
Posts: 101
Likes: 0
Default

thanks for the reply
so there are holes in the frame?
damn =P
Reply
Old Aug 7, 2001 | 04:58 AM
  #4  
Keith13b's Avatar
Keith13b
Racer
20 Year Member
Photogenic
iTrader: (3)
 
Joined: Feb 2001
Posts: 1,325
Likes: 10
From: Orlando, FL
Default

The holes are in the body pannel. The # of holes depends on the year of the vehicle. My emblems were both taped on as well as rivited. They were on so good that when someone decided they wanted my emblems more than I did, they still couldnt get them off - they ended up breaking all the emblems and scratching the car severly. So, when removing the emblems, be very careful.
Reply
Old Aug 7, 2001 | 06:53 AM
  #5  
anthracitetarga's Avatar
anthracitetarga
Lexus Champion
iTrader: (1)
 
Joined: Feb 2001
Posts: 1,617
Likes: 2
From: Virginia
Default

To remove the emblems, heat them up w/ a hair dryer. Be sure not to overheat them as u could damage the paint. Then take some dental floss, fishing line,etc. and slide it beneath the emblem. They should just come right off (at least mine did).
Reply
Old Aug 7, 2001 | 08:37 AM
  #6  
SC_Speed's Avatar
SC_Speed
Rookie
 
Joined: Mar 2001
Posts: 68
Likes: 0
From: Palo Alto, Ca
Question

So are ALL the emblems rivited or just some of them? It was my understanding that the Lexus and SCXXX emblems were simply glued on and not rivited. That way, a partial debadge would be as simple as a hair dryer and goo gone. I know somebody on the GS forum did that... maybe he got the holes filled. Does anyone know what the cost to get the holes filled would be? (approx) Thanks.
Reply
Old Aug 7, 2001 | 08:52 AM
  #7  
CmputerWiz's Avatar
CmputerWiz
Lexus Test Driver
20 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: May 2001
Posts: 1,476
Likes: 1
From: Florida
Default

My SC300 emblem had the rivets. Temporarily I've put really small pieces of electrical tape over them, and then painted that with toyota white touch up paint. You can't see it unless you're standing right over it....I did the same for the holes from the factory spoiler. That's my temporary fix until I can get it painted in the next few weeks....

As for painting....all depends. If you're going to have them filled and painted, you might want to just go ahead and shave any and all parts off that you wish, move emblems, etc, and get the whole car painted. That way you can be sure everything matches!

SR
Reply
Old Aug 7, 2001 | 09:28 AM
  #8  
vj604's Avatar
vj604
Driver
 
Joined: Mar 2001
Posts: 159
Likes: 0
Default

when the RX and GS came out, in 98 or 97, the emblems for all the cars changed, became smaller and no longer riveted...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
revhi
IS - 2nd Gen (2006-2013)
5
Oct 24, 2006 06:20 AM
03LX470
LX - 1st and 2nd Gen (1996-2007)
5
Dec 11, 2004 12:30 PM
George94
ES - 1st to 6th Gen (1990-2018)
1
May 18, 2004 05:47 PM
GOLDSc300
SC - 1st Gen (1992-2000)
13
Nov 9, 2002 05:24 AM
D-MAN63
GS - 2nd Gen (1998-2005)
3
Apr 10, 2001 05:47 PM




All times are GMT -7. The time now is 09:30 AM.