Hope this is the right forum.

Does anyone have a greddy turbo timer in their TT swap? Do you buy any chance have the color codes and the best place to grab the wires at? I have the books and was gonna figure it out this weekend, but if someone has done it I figure its easier to ask. Thanks,


Mike

 

good question. Im not sure myself but I would think theres a harness you can buy for like 10 bucks. I have an old school hks timer right now but ill be switching over to the greddy soon

 

Any competent alarm install shop should have the colors for the ignition wires.
Maybe you can ask a shop to give you a copy.

My turbo timer is a functionality of my remote-start alarm.
Pretty usefull I might add; I can start the car before I get to it, and by the time I get in, I can already boost 9don't have to wait to warm up).

Sorry I wasn't of much help.

~Alan

 

These are the Turbo Timer related wires I was able to dig up for SC300's.
All wires are found in the ignition harness.

'97-00
12v constant | white + white/red+
Starter | black/red+
Ignition1 | black/white+
Ignition2 | black/yellow+
Accesory | red+

'95-96
12v constant | white + white/red+
Starter | black/white+
Ignition1 | black/yellow+
Ignition2 | black/orange+
Accesory | red+

'92-94
12v constant | white + white/red+
Starter | black/white+
Ignition1 | black/yellow+
Ignition2 | black/orange+
Accesory | pink/blue+

 

This is what I was looking for.


Thank you.

Mike