First off i wold like to say that i am a newbie. But I am not stupid. I checked the search for this first. My question is what is the wiring like for my 92 sc300 to a 93 2jzgtte swap? I will be running a safc for now and next year i will shell out for a haltech e6k.I know few people have done this swap so be nice and let me know what ill be dealing with. Btw my swap is comming with a unhacked engine harness and 78,000 miles on the engine and tranny.

 

Could someone move this to forced induction. Sorry about that.

 

you should do a search on phils manual. he did a whole write up on how to do this swap with detailed wiring on it. Its a bit pricey but i hear it saves alot of time.

 

the swap is fairly involving, i would recommend buying dude's book.. it used to be on ebay, cost like 100 bucks but you will probably need it

 

Thanks everyone.

 

you can get the detail manual at: www.UltimateLexusTT.com

Hope you were able to get the supra ECU with your swap... Also, you'll need from the Supra:
Intercooler and piping, of course... Supra Power Steering Pump and remote reservoir... igniter and resistor units from Supra

Good luck with your project!