Engine Upgrades
Thread Starter
6th Gear
Joined: Nov 2024
Posts: 6
Likes: 0
Engine Upgrades
I own a '95 SC400, I plan on installing bigger cams. Either from Kelford Cams or XAT Racing, other than the springs, what else should I upgrade within the valvetrain. I know I should also do piston connecting rods so should I also go ahead and do piston heads?
Racer
Joined: Jun 2007
Posts: 1,722
Likes: 316
From: Washington
Usuaully when going into a head you'll have the valves looked at, either replaced or re-lapped; new valve stem seals, and new springs/retainers/locks.
If you're having a machine shop do it, it may be worth having them install shimless buckets set for your new cams. Kelford sells custom made 1uz-fe shimless buckets, and I would trust their cams too.
If you're having a machine shop do it, it may be worth having them install shimless buckets set for your new cams. Kelford sells custom made 1uz-fe shimless buckets, and I would trust their cams too.
Thread
Thread Starter
Forum
Replies
Last Post
