I have a 2010 rx350. I would like to know if arp 100-7715 wheel stud that is listed for a is300 will fit my rx350?

 

It appears they should fit from the listing at Summit Racing https://www.summitracing.com/parts/a...7715/overview/

Summit shows these as a stock replacement https://www.summitracing.com/parts/r...us/model/rx350 I note they are 1.5 inches long and the ARP ones are 2.6 inches long

What are your plans? Wheel spacers? If so, the Trak Plus ones that bolt over your stock studs are much easier to use I have them on my RX

http://trakplus.com The link really takes you to a general page I have the 25 mm DRM ones.


The best price is still from ECS Tuning at $120 a pair https://www.ecstuning.com/b-h-and-r-...-pair/5065600/

2011 Lexus RX335 Type XU3

5/114.360.1Stud12x1.5
DRM20mm8 4065600$159.95 Pair
DRM25mm8 5065600$159.95 Pair
DRM30mm6065600$179.95 Pair

 

I change the rims and the new cone lug nuts didn't screw in as much as the original. Eventually 4 studs snapped.. I am looking for longer and stronger studs.

 

They may do the trick. Good luck. Hope the new wheels otherwise fit regarding hub center and offset.

 

Hi, I have just found this post and I have the exact concern about that ARP, I also own the same rx350 2010 and short stud from my OEM. Were you able to make it with that ARP?. Thank you