i just got my steering column replaced. did the tech forget to install some sort of insert cover that goes in between the black steering wheel column and the beige color under dash?

 

I just checked mine and there is a similar gap if the steering wheel is in a medium to high position.

 

hmmm...my friend has a 2011 and theirs has a dust cover. i guess the 2010 don't. you can actually see inside all the wires and stuff

 

My 2010 RX350 has a dust cover there made of a felt material.

 

That's what I thought. Thank you!

 

I just checked and mine is covered in felt too. I have a 2010.

 

ok time to go back to the dealer to get it fixed, man they must think I'm annoying! :/

 

Can anyone show me a picture of the dust cover felt? Thanks so much!

 

Hey guys am I missing a cover or something here?

 

2008M3, I've merged your threads since they're both asking about whether you're missing a part. My steering wheel and the footwell area underneath look similar to yours. It's hard to take pictures since I have the black interior. What I can say is the felt piece is towards the back. It doesn't cover much of anything probably because the steering wheel moves when the RX is turned on and off. Both areas are not that visible so I don't mind it.

 

This is what I have on my 2010 RX:

 

And this for the other area:

 

Thanks for your help! It is greatly appreciated!

 

Thanks for the pictures! I really appreciate it.

 

ok so the dealer said they have to check with the tech who did the steering column work but so far they said that the dust cover depends on the 2010 model and where it was made, whether in canada or japan. If the 2011 or 2012 have the dust cover it doesn't mean that my 2010 should have a dust cover. They want to compare EXACT apples to apples meaning 2010 made in canada like mine. They checked a 2010 that was made in Japan and had the dust cover and said they need to find a 2010 made in Canada.

This is weird, so if a 2011 and 2012 have a dust cover, and a 2010 made in Japan has a dust cover, a 2010 made in Canada might not have the dust cover?