Remove cluster??
Thread Starter
Rookie
Joined: May 2013
Posts: 92
Likes: 2
From: Toronto
Remove cluster??
Hi all are there any DIYs that I am not finding? Or has anyone done this and can give me a brief run down?
I'd like to cover up the AFS OFF light like in this DIY.
https://www.clublexus.com/forums/showthread.php?t=625595
I'd like to cover up the AFS OFF light like in this DIY.
https://www.clublexus.com/forums/showthread.php?t=625595
Thread Starter
Rookie
Joined: May 2013
Posts: 92
Likes: 2
From: Toronto
Just thought I would give an update on this. I figured out how to remove the cluster and believe it or not it’s very easy.
Step 1) Remove Cluster Bezel – Held in with clips if you move the steering wheel all the way out and down and give it a good tug (making sure not to break it) it will come loose
Step 2) Remove four screws holding cluster in place
And you’re done. I ended up covering the AFS OFF light with electrical tape just like in the above DIY since my lights seem to be aimed perfectly so I don’t see the need to pay $300+ right now. Also since I just mounted my winter rims and tires, so I threw some electrical tape on the tire pressure light as well. I prefer to use the old fashioned way to tell if a tire is flat, over paying $$ for it. The best part is because the cluster glass is tinted, even if you try to, you can’t see the tape on there.
Step 1) Remove Cluster Bezel – Held in with clips if you move the steering wheel all the way out and down and give it a good tug (making sure not to break it) it will come loose
Step 2) Remove four screws holding cluster in place
And you’re done. I ended up covering the AFS OFF light with electrical tape just like in the above DIY since my lights seem to be aimed perfectly so I don’t see the need to pay $300+ right now. Also since I just mounted my winter rims and tires, so I threw some electrical tape on the tire pressure light as well. I prefer to use the old fashioned way to tell if a tire is flat, over paying $$ for it. The best part is because the cluster glass is tinted, even if you try to, you can’t see the tape on there.
Thread
Thread Starter
Forum
Replies
Last Post
1JZPWRD
SC - 1st Gen (1992-2000)
149
Jun 21, 2017 10:17 PM
R1R
ES - 1st to 6th Gen (1990-2018)
2
May 9, 2012 11:23 AM
