Notices
RX - 1st Gen (1999-2003) Discussion topics related to the 1999 -2003 RX300 models

00 RX300 check engine light flashing

Thread Tools
 
Search this Thread
 
Old Apr 21, 2015 | 05:59 AM
  #1  
KAguilar's Avatar
KAguilar
Thread Starter
Driver School Candidate
 
Joined: Apr 2015
Posts: 12
Likes: 0
From: virginia
Default 00 RX300 check engine light flashing

My car drives fine if I am driving locally (near the house) but if I am go anywhere that is 15-20 miles out the car starts to kick back and the check engine light will flash. The car loses power and seems the overdrive isn't working. This morning after about 10 miles my car would not go over 40 mph. I went to Auto Zone and received the below codes, I am not sure where to start.

P0420
P0441
P1150
P0305
P0300
P0440
P0770
P1320
Reply
Old Apr 21, 2015 | 06:20 AM
  #2  
fastnoypi's Avatar
fastnoypi
Racer
15 Year Member
Liked
 
Joined: Nov 2009
Posts: 1,567
Likes: 87
From: NJ
Default

have the sparkplugs ever been replaced?
Reply
Old Apr 21, 2015 | 07:31 AM
  #3  
KAguilar's Avatar
KAguilar
Thread Starter
Driver School Candidate
 
Joined: Apr 2015
Posts: 12
Likes: 0
From: virginia
Default

The spark plugs and coils were changed the beginning of last summer
Reply
Old Apr 21, 2015 | 08:07 AM
  #4  
fastnoypi's Avatar
fastnoypi
Racer
15 Year Member
Liked
 
Joined: Nov 2009
Posts: 1,567
Likes: 87
From: NJ
Default

i would start with the coils to ensure they are all seated and click properly. Everything else is emmisions related which may have been triggered by a loose coil connector. If all looks good, i'd then check the o2 sensor corresponding to one of your codes with a multi-meter to see if it is within spec.
Reply
Old Apr 21, 2015 | 08:31 AM
  #5  
KAguilar's Avatar
KAguilar
Thread Starter
Driver School Candidate
 
Joined: Apr 2015
Posts: 12
Likes: 0
From: virginia
Default

Thank you, I will start with the coils and the guy at auto zone also recommended checking the hoses. Hoping it is something simple
Reply
Old Apr 21, 2015 | 07:30 PM
  #6  
maxSteel's Avatar
maxSteel
Racer
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2009
Posts: 1,298
Likes: 324
From: nj
Default

i would clear the codes and check which one is reported first.
For that you might need your own reader.
Reply
Old Apr 21, 2015 | 07:54 PM
  #7  
thomas1's Avatar
thomas1
Pole Position
15 Year Member
Photogenic
Liked
 
Joined: Sep 2006
Posts: 3,054
Likes: 103
From: Sacramento, California
Default

Did you use OEM Iridium NGK or Denso spark plugs..?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
M45owner
RX - 1st Gen (1999-2003)
29
Apr 19, 2022 04:38 PM
MrApex
RX - 1st Gen (1999-2003)
37
Oct 25, 2015 12:44 PM
mikegbuff
RX - 2nd Gen (2004-2009)
16
Jan 25, 2013 03:46 PM
donkita
ES - 1st to 6th Gen (1990-2018)
7
Apr 23, 2010 02:30 PM
incharlest
ES - 1st to 6th Gen (1990-2018)
3
Jan 19, 2009 06:38 PM




All times are GMT -7. The time now is 11:35 AM.