shifter problems
Thread Starter
Driver School Candidate
Joined: Mar 2002
Posts: 45
Likes: 0
From: Alabama
shifter problems
My 99 rx300 (85K) shifter is sticking in park, plus not locking in park (rolling back and clicking) Now I have to start it in Nuetral. Has anyone else experienced this?
How do I go about adjusting the shifter linkage? I looked at the shifter mechanism inside and see no visible adjustment. I assume there must be linkage conections at the transmission. Does anyone know how and where to make such an adjustment?
How do I go about adjusting the shifter linkage? I looked at the shifter mechanism inside and see no visible adjustment. I assume there must be linkage conections at the transmission. Does anyone know how and where to make such an adjustment?
Pole Position
Joined: Dec 2002
Posts: 376
Likes: 0
From: Massachusetts
Also check...
I'll let you know if I come up with an adjustment for the linkage - will have to do some diging for that. Also check all the mounts for the engine and transfercase. Obvisouly if one of the mounts have come loose, bent, etc. you will know something else may need attention.
Thread
Thread Starter
Forum
Replies
Last Post
