Replace Blower Motor RX 300
#2
Moderator
Most of the problems (related to age) have been due to blower control module. I have not come across any thread that talks about replacing blower motor.
Let see if any one responds. In the mean time, it may be worth re-checking the control module.
Salim
Let see if any one responds. In the mean time, it may be worth re-checking the control module.
Salim
#5
Driver School Candidate
Thread Starter
Join Date: Dec 2012
Location: MS
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
From what I read, the blower motor needs to be replaced.. The RX has 160k on it..
BTW, the blower motor control relay was replaced by dealer on 8.23.12
Last edited by jmt888; 12-04-12 at 11:21 PM.
Trending Topics
#8
Driver School Candidate
Join Date: Sep 2020
Location: GA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Maybe someone on here can assist me as well. My 1999 rx300 will not blow air or heat. Only sometimes. Never know when it is going to blow. Had a guy look at it and he said i need a blower speed control module. i am not sure what that is. Could it be the same as a blower motor? Please help a lady out.
Thanks
Thanks
#9
Pit Crew
Maybe someone on here can assist me as well. My 1999 rx300 will not blow air or heat. Only sometimes. Never know when it is going to blow. Had a guy look at it and he said i need a blower speed control module. i am not sure what that is. Could it be the same as a blower motor? Please help a lady out.
Thanks
Thanks
#10
Moderator
#11
I changed my A/C blower motor today.
At low speed my previous one was making a low rumbly sound like a bunch of tiny gnomes were hammering away.
I used a TYC 700112, $62 at Amazon. Took me 20 minutes, gnomes are gone now.
At low speed my previous one was making a low rumbly sound like a bunch of tiny gnomes were hammering away.
I used a TYC 700112, $62 at Amazon. Took me 20 minutes, gnomes are gone now.
Thread
Thread Starter
Forum
Replies
Last Post
BluesImage
LS - 1st and 2nd Gen (1990-2000)
1
05-12-14 10:40 AM