Just purchased a used Lexus exhaust, previous user used 'epoxy' to seal both of the mid-pipe flanged ends and I did not see any O-Ring gasket. Any one know the part number for the O-Ring? Or where can I get it? I'm in CANADA!

Also about the M10 bolts and M10 nuts, can I use any kind that I can find at a local hardware store? Or are these bolts heat treated, high strength or whatever?

THANKS!

Sewell sells them:
http://is.sewellparts.com/oem-catalo...S350-2006.html

Kind of pricey though for a gasket - $28.72 with CL discount. They also sell the bolts and nuts.

Can't find the o-ring gasket for the mid pipe flanged ends on sewell, any help?

Ok so you don't mean the large donut gasket that connects the mid-pipe resonator to the rear axle exhaust flange ??

You need the the two gaskets that connect the F-Sport / Lexus HKS axle piping sections seen here:



I would call up Sewell, and see if they can put together a "Service Parts Kit" for the F-Sport Exhaust...
That way you can get all new (properly designed) F-Sport hardware and gaskets for your install.

Do it once & do it right..


Regards,

Joe Z

I think that's the going rate for gaskets these days. I wouldn't think they'd be so pricey but I was surprised when I had to replace mine when I had a 350z a few years back

Darrel at Sewell came through with the o-ring 'package', but I still need to find the part numbers for the 4x M10 bolts, washers and nuts. Any ideas?

Thanks!

You should be able to get them at any hardware store but get a high grade like 8 or higher. Make sure you don't mix fine thread and regular.

Are these the O-ring gaskets that you got with the F-Sport exhaust? They are silver in color!

Hi, where did you end up buying the M10 bolts and what size were they? I just purchased a used Greddy SE and it didnt come with the M10 bolts.