BlueJ

Anybody know how this evap line is bolted up? It goes to the evap system I believe but didn't come with a fitting...comes from the fuel tank

Luxor

iTrader: (15)

It connects to a hose that goes to your charcoal canister which is located behind the passenger fog light inside the fender.

Luxor

iTrader: (15)

Actually, it might be this line instead (77261D) It goes to the gas tank but I am not sure where the 77263A hose connects to.

BlueJ

Thanks Luxor! much apprecitated! The line comes from the gas tank itself but how to install into the Charcoal canister is my issue, the line in question has no fitting and neither do any of the lines coming off the canister itself.

LEXXIUM

iTrader: (1)

Goes to the passenger side front fender area into the square charcoal can then goes from there to the intake manifold along the intake pipe, hard line connects to the frame and from there soft line with clamps

KahnBB6

iTrader: (5)

I'm not 100% sure if this applies to 98-00 SC400's but 98-00 SC300's had most of their EVAP hardware or at least the charcoal canister on the return-less gas tank.

All 1992-1997 models have their charcoal canister in the engine bay and all of their fuel tanks are a return type system.