97+ Gauge Cluster in 93 Sc300
#1
Driver
Thread Starter
97+ Gauge Cluster in 93 Sc300
Hey guys looking for some direction on how to swap a 97 gauge cluster into a 93 SC300 if someone could point me in the right direction I would appreciate it and if anyone is wondering why I am doing it its because my bulbs are blown and I have one bad needle so this is a cheap option for me since I already have the 97 cluster.
thanks
thanks
#2
This company has a very helpful tech department and knows lexus electric and electronic systems. they also repair the clusters. check them out
Thank you for shopping at Tanin Auto - Speedometer Cluster Repair and Sales!
Visit us again at http://www.taninautoelectronix.com/
Thank you for shopping at Tanin Auto - Speedometer Cluster Repair and Sales!
Visit us again at http://www.taninautoelectronix.com/
#3
Lead Lap
iTrader: (2)
here is a diagram I have to cross the wires over:
https://drive.google.com/file/d/0B7r...ew?usp=sharing
here is a slightly modified version for when I did my sc400
https://drive.google.com/file/d/0B7r...ew?usp=sharing
cheers
Marko
https://drive.google.com/file/d/0B7r...ew?usp=sharing
here is a slightly modified version for when I did my sc400
https://drive.google.com/file/d/0B7r...ew?usp=sharing
cheers
Marko
The following users liked this post:
suprasoup (04-12-17)
#4
Driver
Thread Starter
Thanks for the help Estomax and out of curiosity how did you splice it together Im trying to not ruin the harness if possible. Did you solder or use splice connectors or just twist on the wires then cover with electrical tape or heat shrink.
thanks
thanks
The following users liked this post:
joe diego (01-02-21)
Thread
Thread Starter
Forum
Replies
Last Post
Slow_Sc3
Performance & Maintenance
20
04-17-17 11:59 PM
LexusFTW
SC400 / 300 Classifieds
6
06-05-08 08:26 AM