1jz auto ecu manual harness
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2011
Location: Wa
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
1jz auto ecu manual harness
So I picked up a 1j that used to be in a supra and the guy I bought it from sold the converted supra harness, so all I have is a chopped up soarer harness that is missing quite a few clips... I need a new harness.
Any ways ive verified that the ecu is a auto soarer ecu.
The only soarer harnesses that I can find are for manual. Would it be possible to use a auto ecu with a manual harness? Ive read that the ecus are interchangeable. WOuldnt this mean that the harnesses are too?
MY sc is a manual if that matters
Any ways ive verified that the ecu is a auto soarer ecu.
The only soarer harnesses that I can find are for manual. Would it be possible to use a auto ecu with a manual harness? Ive read that the ecus are interchangeable. WOuldnt this mean that the harnesses are too?
MY sc is a manual if that matters
#3
Lexus Test Driver
iTrader: (4)
Negative Ghost Rider.
If it were an Auto ECU and a Manual Harness, you would just opt out of a few wires off the 16-pin plug on the right, and also wire in the Clutch switch.
The 1jzgte Auto trans functions are consolidated on the ECU. Everything else is identical.
Also, I use punctuation. Have a nice day!
If it were an Auto ECU and a Manual Harness, you would just opt out of a few wires off the 16-pin plug on the right, and also wire in the Clutch switch.
The 1jzgte Auto trans functions are consolidated on the ECU. Everything else is identical.
Also, I use punctuation. Have a nice day!
Thread
Thread Starter
Forum
Replies
Last Post