SC 400 Engine swap
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2008
Location: wisconsin
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
SC 400 Engine swap
I just bought a 92 sc 400 im looking to swap the engine out this winter, ive been reading the forums about doing the 1jz 2jz and supercharging the v8 conversions. Im mostly interested in doing the 2jz swap but im reading alot of people saying it is to hard and to much money but if done well worth it. I dont want to start a conversion thats going to be near impossible to complete. If i were to do the 2jz conversion where do i start, i have a stock sc 400 whats the first step? Also i want a manual tranny all im seeing for 2jz engines is auto trannys where do i find the best engine setup for the money? I will appreciate any help anybody can give me. Im new to this and will use any help i can get thanks.
#3
Driver School Candidate
Thread Starter
Join Date: Nov 2008
Location: wisconsin
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I have a good Idea on where to start after reading around and finding some helpful threads, If anybody knows where to get the motor mounts for the sc400 to a 2jz thanks
#4
Lexus Test Driver
iTrader: (1)
This thread might be useful:
https://www.clublexus.com/forums/sho...hlight=2jz-gte
Honestly though, you should take the time to do some searching, there's A LOT of information in older posts, reading through them will help you so much. I was able to do my whole swap by reading old posts. Goodluck.
https://www.clublexus.com/forums/sho...hlight=2jz-gte
Honestly though, you should take the time to do some searching, there's A LOT of information in older posts, reading through them will help you so much. I was able to do my whole swap by reading old posts. Goodluck.
#6
Driver School Candidate
Thread Starter
Join Date: Nov 2008
Location: wisconsin
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Wheres the best place to purchase the 2jz and if possible the manual setup as well ive been looking around and just have a hard time trusting some people out there trying to sell god knows what. Thanks
#7
Driver School Candidate
Thread Starter
Join Date: Nov 2008
Location: wisconsin
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
ive been looking at complete engines, wheres the best place to buy one or do you recemend building one from a block? if so where to get the block/head/esentials
Thread
Thread Starter
Forum
Replies
Last Post