Notices
SC - 1st Gen (1992-2000)

Engine whining? Vid..

Thread Tools
 
Search this Thread
 
Old Sep 4, 2008 | 10:30 PM
  #1  
vwynn's Avatar
vwynn
Thread Starter
Lexus Fanatic
iTrader: (4)
 
Joined: Feb 2007
Posts: 5,945
Likes: 53
From: CA
Default Engine whining? Vid..

Ok so this has been happening for a long time... so far nothing bad just. annoying. So if i push my car for a bit (not WOT) just accelerating quickly reving up to maybe 4.5k max my car starts to whine, kinda sounds like a supercharger.. just doesnt have the kick of a supercharger..

so yea here is a vid.. dont mind the crusty coolant...been to busy n to lazy to clean it up heh =p



Starter might sound different because i changed it out (OEM starter died) but yea pay attention to a high pictch like whine..

any ideas?
Reply
Old Sep 4, 2008 | 11:06 PM
  #2  
demise77's Avatar
demise77
Driver School Candidate
 
Joined: Aug 2008
Posts: 11
Likes: 0
From: Maryland
Default

It sounds like one of your serpentine bely pulleys are going bad. Try removing it and then starting the car. If the sound is gone its one of the pulleys. Try spinning each of the pulleys by and and feeling for resistance, grittiness, or play.
Reply
Old Sep 4, 2008 | 11:36 PM
  #3  
32SC's Avatar
32SC
Pit Crew
 
Joined: Feb 2007
Posts: 152
Likes: 0
From: SoCal 714
Default

I had the same noise on my car about a year ago... it lasted a few months and then one day my car started smoking up and it stalled. It turns out that the bearing on my idler pulley was making all that noise and it finally seized and burned up my serpentine belt (hence the smoke)
Reply
Old Sep 5, 2008 | 01:42 AM
  #4  
93sc3005sp's Avatar
93sc3005sp
Pole Position
 
Joined: Apr 2008
Posts: 280
Likes: 1
From: california
Default

probly so big deal , love your seafoam vid btw
Reply
Old Sep 5, 2008 | 10:03 AM
  #5  
vwynn's Avatar
vwynn
Thread Starter
Lexus Fanatic
iTrader: (4)
 
Joined: Feb 2007
Posts: 5,945
Likes: 53
From: CA
Default

Originally Posted by demise77
It sounds like one of your serpentine bely pulleys are going bad. Try removing it and then starting the car. If the sound is gone its one of the pulleys. Try spinning each of the pulleys by and and feeling for resistance, grittiness, or play.

It does sound like a pulley is going bad... i guess ill go check when i get home. Hopefully i have time.

I had the same noise on my car about a year ago... it lasted a few months and then one day my car started smoking up and it stalled. It turns out that the bearing on my idler pulley was making all that noise and it finally seized and burned up my serpentine belt (hence the smoke)

did ur engine whine when u start it? The vid was taking right after i got home from work. (35 mile drive)



probly so big deal , love your seafoam vid btw
Hah thanks.. sucks that i havent done a seafoam vid with the straight pipe =p

Thanks for the help so far guys!
Reply
Old Sep 5, 2008 | 10:50 AM
  #6  
demise77's Avatar
demise77
Driver School Candidate
 
Joined: Aug 2008
Posts: 11
Likes: 0
From: Maryland
Default

It only takes a minute to remove the belt. 14mm to the tensionor and pop it off. If the noise is gone and you suspect a particular pulley to be the culprit. spray some penetrating oil on the bushing and reinstall the belt. If the noise is gone that was the pulley. The noise will only go away for a day or 2 max. def not a permenant fix.
Reply
Old Sep 5, 2008 | 11:04 AM
  #7  
vwynn's Avatar
vwynn
Thread Starter
Lexus Fanatic
iTrader: (4)
 
Joined: Feb 2007
Posts: 5,945
Likes: 53
From: CA
Default

i see i see... i have my eyes on a certain pulley.. but i dont know whats it called.. Its near the AC compressor.. but dam if someone had a picture of the engine bay i could circle it to help..
Reply
Old Sep 5, 2008 | 11:09 AM
  #8  
32SC's Avatar
32SC
Pit Crew
 
Joined: Feb 2007
Posts: 152
Likes: 0
From: SoCal 714
Default

Originally Posted by vwynn
did ur engine whine when u start it? The vid was taking right after i got home from work. (35 mile drive)
I would get the noise on start up and it wouldn't go away once the car was warm. The sound would be drowned out by the engine at ~ 4k rpms though
Reply
Old Sep 5, 2008 | 11:16 AM
  #9  
LiCelsior's Avatar
LiCelsior
Retired
CL Folding 500,000
15 Year Member
iTrader: (32)
 
Joined: May 2007
Posts: 12,364
Likes: 19
From: NY
Default

u got a 400 right?

hope this helps, courtesy of Lexls.com
Reply
Old Sep 5, 2008 | 11:27 AM
  #10  
vwynn's Avatar
vwynn
Thread Starter
Lexus Fanatic
iTrader: (4)
 
Joined: Feb 2007
Posts: 5,945
Likes: 53
From: CA
Default



got this pic =p

yea whats the red circle called?

Last edited by vwynn; Sep 5, 2008 at 11:45 AM.
Reply
Old Sep 6, 2008 | 10:49 PM
  #11  
vwynn's Avatar
vwynn
Thread Starter
Lexus Fanatic
iTrader: (4)
 
Joined: Feb 2007
Posts: 5,945
Likes: 53
From: CA
Default

anyone know whats that pulley called? is it a hydrolic pump or something for the fan. O_O
Reply
Old Sep 7, 2008 | 03:47 PM
  #12  
vwynn's Avatar
vwynn
Thread Starter
Lexus Fanatic
iTrader: (4)
 
Joined: Feb 2007
Posts: 5,945
Likes: 53
From: CA
Default

well i spun the pullie that i circled... clockwise and counter clockwise... for some reason theres some resistance going counter... but all the other pullies are buttery smooth...
Reply
Old Sep 8, 2008 | 06:00 PM
  #13  
demise77's Avatar
demise77
Driver School Candidate
 
Joined: Aug 2008
Posts: 11
Likes: 0
From: Maryland
Default

on my sc it its the fan pump. Make sure yours also isnt driving the fan. If it is driving the fan then that is what the resistance is from. Did you start the car w/o the belt on to see if the fixed the problem? Also If it does drove your fan check the fluid level for the fan. Make sure its not low. If it is the pump would make a crazy whine like you are experiencing.
Reply
Old Sep 8, 2008 | 08:44 PM
  #14  
vwynn's Avatar
vwynn
Thread Starter
Lexus Fanatic
iTrader: (4)
 
Joined: Feb 2007
Posts: 5,945
Likes: 53
From: CA
Default

Originally Posted by demise77
on my sc it its the fan pump. Make sure yours also isnt driving the fan. If it is driving the fan then that is what the resistance is from. Did you start the car w/o the belt on to see if the fixed the problem? Also If it does drove your fan check the fluid level for the fan. Make sure its not low. If it is the pump would make a crazy whine like you are experiencing.
is it safe to start the car without the drive belt? and what do u mean it driving the belt? also the problem only occurs when i someone push the car or push the car for a bit... high rev it n such. =/
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dimagurr
SC - 1st Gen (1992-2000)
5
Oct 23, 2016 10:59 AM
AJT123
LS - 3rd Gen (2001-2006)
6
Mar 21, 2016 06:46 PM
vwynn
GS - 2nd Gen (1998-2005)
6
May 2, 2010 11:51 AM
baboya96
SC430 - 2nd Gen (2001-2010)
5
Feb 8, 2008 05:47 PM
ihiryu
SC - 1st Gen (1992-2000)
7
Oct 31, 2007 03:03 PM




All times are GMT -7. The time now is 02:57 AM.