Need help w/ 1jz vacuum hose and turbo sensor
#1
Driver
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: CA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Need help w/ 1jz vacuum hose and turbo sensor
Hey guys, I am almost complete with the swap save for these vacuum hoses. I have two that come from the intake manifold, one on the front (pic 1) and one on the rear (pic 2). I also have one coming from underneath the middle of the intake manifold (pic 2).
I also have a sensor coming off of the main engine harness that says "sensor assy turbo pressure" (pic 3). I assume one of the hoses go to this sensor, while the other two go what I believe the repair manual refers to as the VSV Heater Valve (pic 4). Can someone give me some clarification what goes where? Thanks in advance
I also have a sensor coming off of the main engine harness that says "sensor assy turbo pressure" (pic 3). I assume one of the hoses go to this sensor, while the other two go what I believe the repair manual refers to as the VSV Heater Valve (pic 4). Can someone give me some clarification what goes where? Thanks in advance
Trending Topics
#8
Driver
Thread Starter
iTrader: (1)
Join Date: Jan 2007
Location: CA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Ok, so I found out that the RED tube goes to the power steering hose, looks like it just broke off.
The BLUE hose appears to go to a charcoal canister, unfortunately it doesn't appear like I have one on my 97 SC400.
Still don't know what to do with the green hose.
The BLUE hose appears to go to a charcoal canister, unfortunately it doesn't appear like I have one on my 97 SC400.
Still don't know what to do with the green hose.
Thread
Thread Starter
Forum
Replies
Last Post
kidd1
ES - 1st to 4th Gen (1990-2006)
4
06-23-10 01:09 PM