Help - Boosting Problem
#1
Registered User
Thread Starter
Join Date: Oct 2004
Location: Maryland
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Help - Boosting Problem
Spec - 99 Sc300 with GTE and BL Auto 3800 Stall, BL67DBB
Ever since I had the stock twins, the boost was very unpredicable. When it was stock I thought my vacuum routing was bad so I replaced the turbos with single.
Still the same thing, the boost some days hit 10 lbs, than 15lbs, (where I had it set with EVC - checked all the vacuum lines and replaced them all just incase pin holes) but still some days it will hit 18 lbs than 10 lbs.
Could it be due to my stock(SC) rear end??
I have checked and tighted all the piping. Any other ideas? Thanks in advance.
Ever since I had the stock twins, the boost was very unpredicable. When it was stock I thought my vacuum routing was bad so I replaced the turbos with single.
Still the same thing, the boost some days hit 10 lbs, than 15lbs, (where I had it set with EVC - checked all the vacuum lines and replaced them all just incase pin holes) but still some days it will hit 18 lbs than 10 lbs.
Could it be due to my stock(SC) rear end??
I have checked and tighted all the piping. Any other ideas? Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post