97 SC300 w/USDM 2JZ-GTE and V160 <Speedometer Question?>
#16
Lexus Champion
Join Date: Apr 2006
Location: South Florida
Posts: 2,872
Likes: 0
Received 0 Likes
on
0 Posts
#17
is your cel light working? here is the link http://supraforums.com/forum/showthread.php?t=447592
#25
Supra Dr:
Well all the wiring was fine, so I got under the car to remove the VSS and I found out that I had to drop the trans inorder to get it out... so I was getting ready to R&I it when I decided to remove the wiring harness/plug that connects to the vss and check to see if the connection was out. Well I think this is part of the problem.
Cause I noticed that after I tinkered with the plug harness, the speedometer is working like its suppose to but it only goes buzzerk after about 100 mph, it doesn't go crazy like it use to at any speed. So I think this was part of my problem, but as soon as I get some time i'll drop the trans and do a complete test on the vss. At least now im able to get an accurate speed..up to about 100.
Well all the wiring was fine, so I got under the car to remove the VSS and I found out that I had to drop the trans inorder to get it out... so I was getting ready to R&I it when I decided to remove the wiring harness/plug that connects to the vss and check to see if the connection was out. Well I think this is part of the problem.
Cause I noticed that after I tinkered with the plug harness, the speedometer is working like its suppose to but it only goes buzzerk after about 100 mph, it doesn't go crazy like it use to at any speed. So I think this was part of my problem, but as soon as I get some time i'll drop the trans and do a complete test on the vss. At least now im able to get an accurate speed..up to about 100.
#26
1UZFE/2JZGTE
iTrader: (11)
Supra Dr:
Well all the wiring was fine, so I got under the car to remove the VSS and I found out that I had to drop the trans inorder to get it out... so I was getting ready to R&I it when I decided to remove the wiring harness/plug that connects to the vss and check to see if the connection was out. Well I think this is part of the problem.
Cause I noticed that after I tinkered with the plug harness, the speedometer is working like its suppose to but it only goes buzzerk after about 100 mph, it doesn't go crazy like it use to at any speed. So I think this was part of my problem, but as soon as I get some time i'll drop the trans and do a complete test on the vss. At least now im able to get an accurate speed..up to about 100.
Well all the wiring was fine, so I got under the car to remove the VSS and I found out that I had to drop the trans inorder to get it out... so I was getting ready to R&I it when I decided to remove the wiring harness/plug that connects to the vss and check to see if the connection was out. Well I think this is part of the problem.
Cause I noticed that after I tinkered with the plug harness, the speedometer is working like its suppose to but it only goes buzzerk after about 100 mph, it doesn't go crazy like it use to at any speed. So I think this was part of my problem, but as soon as I get some time i'll drop the trans and do a complete test on the vss. At least now im able to get an accurate speed..up to about 100.
Thread
Thread Starter
Forum
Replies
Last Post
tuninghaus
Performance & Maintenance
2
05-28-19 06:01 PM
USAF_RT
Performance & Maintenance
13
07-27-07 07:27 PM