1jzgte swap into sc300 questions?
#1
Rookie
Thread Starter
Join Date: Jun 2007
Location: Florida
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
1jzgte swap into sc400 questions?
I have read to this swap you need the sc300 mounts....Can i just order new mkIV supra mounts?
with the JDM 1JZ all i have to do is extend the wires about 2 and a half feet?
And for a driveshaft i should use a sc300 5 speed DS or a Soarer 5 sp DS.......can i just make a custom DS using my existing sc400 auto DS?
Doing the swap and extending the wires everything should run right except for the tempt gauge and tach?
I have done lots of searching through this website and many other but cant get any concrete info on this subject when regarding a sc400.....i have seen a few people have done it to their sc4's so its not imposible...but i just want to do it myself.
with the JDM 1JZ all i have to do is extend the wires about 2 and a half feet?
And for a driveshaft i should use a sc300 5 speed DS or a Soarer 5 sp DS.......can i just make a custom DS using my existing sc400 auto DS?
Doing the swap and extending the wires everything should run right except for the tempt gauge and tach?
I have done lots of searching through this website and many other but cant get any concrete info on this subject when regarding a sc400.....i have seen a few people have done it to their sc4's so its not imposible...but i just want to do it myself.
Last edited by Supra Dr; 06-10-07 at 04:03 PM. Reason: request
#2
Driver
iTrader: (1)
Join Date: Jan 2007
Location: CA
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Would be interested to find these answers myself, particularly about the wiring. I read posts that there are some wiring differences with the sc400 but no one goes into particular detail what those are.
Thread
Thread Starter
Forum
Replies
Last Post