NX - 1st Gen (2015-2021)

Lowering boot floor on NX200T

Thread Tools
 
Search this Thread
 
Old 05-25-17, 02:18 AM
  #1  
suseu
Driver School Candidate
Thread Starter
 
suseu's Avatar
 
Join Date: May 2017
Location: not applicable
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Lightbulb Lowering boot floor on NX200T

Recently I did minor upgrade to car audio - deafening doors, upgrading crossovers and replacing wideband speakers. Result is suprisingly good.

I was also considering trunk sub but ultimately resigned because of space loss. With my instalator we were discussing possibility of putting sub in place of spare tire.
After removing cover, plastics, spare tire and styrofoam under it plenty of space revealed itself. There is like additional 20-30cm usable under trunk floor.
Trunk space is basically my only issue with a car. Especially with shelf in place. Trunk is super low this way. I almost never fold seats so I don't need flat floor with seats folded.

Did anyone considered giving up on spare tire and lowering boot floor ? Something like HDF floor with some cover (maybe rubber) added.
The only problem seem to be with spare tire attaching point which is welded piece of metal, standing out from the floor to about 10 cm.

Has anyone considered / did that ? If yes - care to share results ?

I'll include some pictures soon, I didn't take any first time I removed all trunk "additions".
Old 05-25-17, 11:50 AM
  #2  
jugdish
Intermediate
 
jugdish's Avatar
 
Join Date: Aug 2005
Location: WI
Posts: 303
Likes: 0
Received 37 Likes on 31 Posts
Default

only issue I see is the cover over the spare tire is extremely light weight and cheap. A good subwoofer is going to rattle that thing like tissue paper. That being said... it really depends on if you want to roll the dice driving without a spare tire....
Old 05-25-17, 01:10 PM
  #3  
suseu
Driver School Candidate
Thread Starter
 
suseu's Avatar
 
Join Date: May 2017
Location: not applicable
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

I wasn't planning to use current floor. More like throwing spare tire, under-floor plastics and floor itself to the basement and either use rubber mat or custom hdf board with some liner. So something solid.
Old 05-25-17, 01:15 PM
  #4  
d8168055
Pole Position
 
d8168055's Avatar
 
Join Date: Jun 2016
Location: California
Posts: 265
Received 38 Likes on 28 Posts
Default

Here's a thread by Rozay604 you can check out: https://www.clublexus.com/forums/nx-...-by-helix.html

I dont want to speak for him, maybe you can DM him if you have any questions...
Old 05-28-17, 05:53 AM
  #5  
suseu
Driver School Candidate
Thread Starter
 
suseu's Avatar
 
Join Date: May 2017
Location: not applicable
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Images without some plastics and spare wheel. There is nothing under plastics on the left.

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DJWLDW
SC430 - 2nd Gen (2001-2010)
4
02-15-19 12:16 PM
bornking
LS - 1st and 2nd Gen (1990-2000)
16
02-02-19 06:50 AM
MadHungari
SC430 - 2nd Gen (2001-2010)
4
10-09-11 06:25 PM
D2M
IS F (2008-2014)
5
07-11-10 05:10 PM
rking11
SC430 - 2nd Gen (2001-2010)
2
04-29-10 07:34 AM



Quick Reply: Lowering boot floor on NX200T



All times are GMT -7. The time now is 12:41 PM.