Turbo Project
04-22-07, 10:51 PM
#31
Heres an updated parts list of whats left to get. Most of the stuff is sourced and i know where and how im getting it. The reason I probably didnt order it is because im not ready yet.
If you guys know of any good deals on the parts im missing hit me up!
- Turbo- T3/T40e Garrett Hybrid turbo [OBTAINED]
- Intercooler- [OBTAINED]
- Fuel pump- Walbro 255 (Sourced)
- Fuel Pump regulator- (Sourced)
- Piping [OBTAINED] Thanks toys!
- 7MGTE 440cc Injectors- [OBTAINED]
- HKS SSQV- (Sourced)
- Exhaust- [OBTAINED]
- Oil, Water/Coolant lines to and from turbo and fittings [OBTAINED]
- Tuning management- SMT6 or greddy emanage (still deciding but sourced both)
- BRK7E Copper spark plugs- (Sourced)
- Oil Temp gauge- [OBTAINED]
- Boost Gauge-[OBTAINED]
- AEM Wideband A/F Gauge- (Sourced)
- Tial 38mm Wastegate- [OBTAINED]
- Oil Cooler [OBTAINED]
- Turbo Timer (I may get this later HKS)
- Water Injection (Sourced)
-EGT Gauge (Sourced)
If you guys know of any good deals on the parts im missing hit me up!
- Turbo- T3/T40e Garrett Hybrid turbo [OBTAINED]
- Intercooler- [OBTAINED]
- Fuel pump- Walbro 255 (Sourced)
- Fuel Pump regulator- (Sourced)
- Piping [OBTAINED] Thanks toys!
- 7MGTE 440cc Injectors- [OBTAINED]
- HKS SSQV- (Sourced)
- Exhaust- [OBTAINED]
- Oil, Water/Coolant lines to and from turbo and fittings [OBTAINED]
- Tuning management- SMT6 or greddy emanage (still deciding but sourced both)
- BRK7E Copper spark plugs- (Sourced)
- Oil Temp gauge- [OBTAINED]
- Boost Gauge-[OBTAINED]
- AEM Wideband A/F Gauge- (Sourced)
- Tial 38mm Wastegate- [OBTAINED]
- Oil Cooler [OBTAINED]
- Turbo Timer (I may get this later HKS)
- Water Injection (Sourced)
-EGT Gauge (Sourced)
Last edited by Curry; 05-14-07 at 09:19 AM.
05-15-07, 08:42 PM
#33
Nice update today:
1. I fixed the short that caused my tails and gauges to go out +2!
2. We moved the intercooler up, more of the bumper support went. +1
3. Installed the smaller brake pedal. I'm gonna try to do the clutch pedal this weekend. (Doing the auto to 5-spd swap) +2
4. The handbrake works! +2
5. Ghetto rigged a cold air intake using the intercooler. We put mesh on the inlet lol.+5 ahaha
6. Removed the cruise control. (never used it.)
We decided on that style intercooler to simplify the piping.
We didnt get to mount the turbo but theres still time. Piping should be here soon as well as the BOV so its about to really begin! We've got everything except for the piggyback and a few small things that dont have to be ordered (Home Depot!)
No more cruise:
Re-Mounting
"Cold Air Intake":
RAWR:
1. I fixed the short that caused my tails and gauges to go out +2!
2. We moved the intercooler up, more of the bumper support went. +1
3. Installed the smaller brake pedal. I'm gonna try to do the clutch pedal this weekend. (Doing the auto to 5-spd swap) +2
4. The handbrake works! +2
5. Ghetto rigged a cold air intake using the intercooler. We put mesh on the inlet lol.+5 ahaha
6. Removed the cruise control. (never used it.)
We decided on that style intercooler to simplify the piping.
We didnt get to mount the turbo but theres still time. Piping should be here soon as well as the BOV so its about to really begin! We've got everything except for the piggyback and a few small things that dont have to be ordered (Home Depot!)
No more cruise:
Re-Mounting
"Cold Air Intake":
RAWR:
05-20-07, 12:12 AM
#34
More stuff came in today =D
Its about time to start putting everything together...
Since I have a returnless fuel system I decided to change my fuel rails to the 3vzfe rails and add the returnline, FPR and new fuel pump.
Its about time to start putting everything together...
Since I have a returnless fuel system I decided to change my fuel rails to the 3vzfe rails and add the returnline, FPR and new fuel pump.
Last edited by Curry; 05-20-07 at 07:09 AM.
Thread
Thread Starter
Forum
Replies
Last Post
