When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just installed DVD/TV bypass without removing Navigation Unit
I've just installed the DVD Bypass harness without removing the Navigation unit. You can apply this method to the Navi/DVD too if you wish. Below is some images I took while doing the install. The harness I got has no switch like beatsonic harness. Press DISC to watch DVD while driving, press again back to factory setting. Just plug and play.
How?
There is no special trick. All you have to do is tuck your hand under the navi unit and unplug the harness on your left side where I drew rectangle in the image that I just uploaded.
Last edited by lieup; Jul 2, 2014 at 10:35 AM.
Reason: edit
Hey if you sell your LS can I have those buttons that say comfort/sport, I have some blank ones on mine, lol, just kidding. I'm too scared to install the bypass, my record isn't too good with electronics after I replaced my kids ipad screen, I put a hole in the battery accidentally poked it open with screwdriver, now battery gets real hot, then loses charge, I'm not touching anything electronic anymore lol.
I have the PS bypass and i had to remove my whole navi/radio to do the install ( and trust me removing the two screws that hold the unit in place is HELL to keep from dropping deeper into the console).Im really curious on how this is done please give more info/pic detailing your install this would be a great help to other members for future installs. thanks
I've just installed the DVD Bypass harness without removing the Navigation unit. You can apply this method to the Navi/DVD too if you wish. Below is some images I took while doing the install. The harness I got has no switch like beatsonic harness. Press DISC to watch DVD while driving, press again back to factory setting. Just plug and play.
How?
There is no special trick. All you have to do is tuck your hand under the navi unit and unplug the harness on your left side where I drew rectangle in the image that I just uploaded.
If I'm reading this correctly, you are saying there was no "bypass harness" or module involved? You just simply unplug that harness in the rectangle and that's it?