GR6RR

^ ROFL... Good job guys! Thanks for the efforts put forth in this retro-fit mod.. I'm going to stop by my local dealer this Saturday and see if I can get them on my "family" discount.

SW17LS

Hey, even I have a foible every now and again lol

comotiger

Thanks! What MY is your LS? The sliding pedal assembly may have started from the 2013MY. Please check your gas pedal assembly to see if it can be modded before ordering.

LS430FL

Think this mod would work on a 2011 LS460L as well? I really like the pedals you got…

SW17LS

The gas pedal on the pre 2013 car is in fact different. Don't know if the base is, but the pedal is.

comotiger

Here's how the 2016 GSf pedals look in the LS. What do you think?

I am currently having a shop fabricate an aluminum dead pedal plate that I will inlay with black plastic to resemble the look of these pedals. Hope to share info about design and installation if I succeed! Hopefully done by Labor Day!

SW17LS

Looking good! Can you take a picture from a little further out?

comotiger

Here they are. The dust and scuff marks really stick out. I guess I will be cleaning this weekend!

SW17LS

Looks great! Even without the dead pedal done.

VanCityLS4

iTrader: (1)

I made the mistake of ordering the GSF pedals for my 2011. I'm sure too that I saw this thread and didn't not read into the details.

Can anyone confirm if the early GS F Sport pedals will swap over since I've realized that the GSF pedals will not work on cars prior to 2012??

Edit- Did more digging and found pictures of 2007-12 LS's with Early GS F Sport pedals


Does anyone know the early GS F sport pedal part numbers ?

peasodos

iTrader: (1)

For anyone planning on doing this mod you can get the dead pedal and the other parts cheap from japan.

http://jp-carparts.com/

Apparently the RC-F and GS F in Japan already has a matching dead pedal:
1x 58190-24050
$38.34

Dead Pedal Backing plate:
1x 58192-24040
$7

Screws to attach dead pedal to backing plate:
4x 90168-40061

Gas pedal:
1x 78101-30061
$34.13

Brake Pedal:
1x 47121-24010
$34.75

Shipping $35

comotiger

Good info. Depending upon the MY of your LS, the GSF brake and gas pedals may not fit correctly, as another poster above indicated. As for the dead pedal, the one in the photo you posted is designed for the RCF/RC300, and not for the LS. It seems to be a bit wider and shorter than the dead pedal area in the LS. Besides it is not clear how this pedal and the backing plate will be attached to the carpet in the car. If you have installed it in your LS, please post pics of the install. I am sure a bunch of 4LS folks here would be interested in the dead pedal and other covers, but have generally been deterred by the fitment and cost issues.

FYI, I did a custom dead pedal mod, and am very happy with the results . It was far more expensive than your suggestions.
https://www.clublexus.com/forums/ls-...pedal-mod.html

SW17LS

comotiger

That's great, Steve. Didn't you do this mod on your 2015 LS? You could have swapped the OEM pedals back and re-used the GSF pedals. That reminds me: Did you save your Lloyd Luxe mats for the 2017. Or is there a fitment issue because of the AWD to RWD change? You will need new mats for the rear anyways due to the LWB.

SW17LS