Advanced
I bought that and they designed the mirrors about 3 inches too long. Cost me some money of wasted labor by my guy working on it...
Pole Position
ok...so I'm doing the same for my 07 LS....orginally had them replace with aftermarket outer housing with lights from "niles"? here on CL....paint didn't exactly match as well as clear coat coming off now, so i decided last week to just get an 09-10 side mirror assembly and will try to swap these out for a nice OEM updated look ($1,400/pair !! for those wanting to know price)...I don't think the harness is the same for the differing years so will have to get help....anybody can point me to wiring shematics or whatnot to make this easier??
Rookie
Quote:
The 2010 mirrors have 16wire/16 pin connectors.The car harness connectors they plug into are 14 wire/16 pin connectors.The two additional wires in the mirror connector are the wires that control the turn signal lights in the mirror.You have to add two new wires and tap into these wires. Connect one of the new wires to ground and the other into the turn signal circuit.Originally Posted by tennisstar
ok...so I'm doing the same for my 07 LS....orginally had them replace with aftermarket outer housing with lights from "niles"? here on CL....paint didn't exactly match as well as clear coat coming off now, so i decided last week to just get an 09-10 side mirror assembly and will try to swap these out for a nice OEM updated look ($1,400/pair !! for those wanting to know price)...I don't think the harness is the same for the differing years so will have to get help....anybody can point me to wiring shematics or whatnot to make this easier??
Pole Position
Quote:
Ok...that sounds very smart and way over my head!Originally Posted by marylandlp
The 2010 mirrors have 16wire/16 pin connectors.The car harness connectors they plug into are 14 wire/16 pin connectors.The two additional wires in the mirror connector are the wires that control the turn signal lights in the mirror.You have to add two new wires and tap into these wires. Connect one of the new wires to ground and the other into the turn signal circuit.
...lol....I'll let my mechanic take a shot with the info you provided...thanks a ton!.....oh and what about the existing harness for my 2007?....would I have to modify/cut these?...again, thanks for helping me out.
Lexus Fanatic
I asked the idiots at bell Lexus for a quote on the mirrors and they said they were 1600 each installed. Typical crappy Bell Lexus. These were the same idiots who tried to charge me 625 bucks for TPMS
Rookie
Quote:
...lol....I'll let my mechanic take a shot with the info you provided...thanks a ton!.....oh and what about the existing harness for my 2007?....would I have to modify/cut these?...again, thanks for helping me out.
you do not have to modify the existing harness.However,you do have to add 4 new wires (2 for each mirror).Originally Posted by tennisstar
Ok...that sounds very smart and way over my head!
...lol....I'll let my mechanic take a shot with the info you provided...thanks a ton!.....oh and what about the existing harness for my 2007?....would I have to modify/cut these?...again, thanks for helping me out.
Driver
I would not use the mirrors from and IS on a LS....I had a IS convertible--I know the mirrors had the turn signals, puddle lamps, were heated, and were auto dimming but I believe that LS also has the capacity for the mirrors to fold-- i know that feature was not offered on the ISC (in North America anyway).
dentate
Oshawa, ON
dentate
Oshawa, ON
Pole Position
Quote:
Umm...ouch!....just re-read your post.....1600 EACH,.....yeah, they're ripping u off on labor....marylandlp gave good advice that I now understand after looking at the connector pins....it shouldn't be difficult at all to add the 2 wires to the harness connectors....I'll post pics of before and after when I finish this mod.Originally Posted by I8ABMR
I asked the idiots at bell Lexus for a quote on the mirrors and they said they were 1600 each installed. Typical crappy Bell Lexus. These were the same idiots who tried to charge me 625 bucks for TPMS
TPMS however shoulda been no more than 100 for 4....I got the parts but local dealer refused/couldn't do it on 22" aftermarket tires...had to replace the original tpms into the new tires to make it work out...
Pole Position
Quote:
Thanks again!!!Originally Posted by marylandlp
you do not have to modify the existing harness.However,you do have to add 4 new wires (2 for each mirror).
Driver School Candidate
I purchased a set of eBay for $550 for the pair , got the local auto electrician to sort
Out the wiring only took him an hour they were 2010 ls 460 I fitted them to my
2008 ls 600 hl
Regards Vern
Out the wiring only took him an hour they were 2010 ls 460 I fitted them to my
2008 ls 600 hl
Regards Vern
Lexus Test Driver
Quote:
Nope no BS monitoring..Originally Posted by NobleSpine
do these 2010 mirros have blind spot monitoring in them? I think it is worth $1600 if they do.
Pole Position
Quote:
Out the wiring only took him an hour they were 2010 ls 460 I fitted them to my
2008 ls 600 hl
Regards Vern
Thats a dang good price!....color matched and all??....costs me 1500 total....looks exactly like the black mirrors in the beginning of the threads....would've took picks, but don't think iPhone pics would've done it justice...lolOriginally Posted by verneyboy
I purchased a set of eBay for $550 for the pair , got the local auto electrician to sortOut the wiring only took him an hour they were 2010 ls 460 I fitted them to my
2008 ls 600 hl
Regards Vern
Driver School Candidate
Quote:
Out the wiring only took him an hour they were 2010 ls 460 I fitted them to my
2008 ls 600 hl
Regards Vern
That's a fabulous price. I've been stalking ebay for them with no luck on an OEM 2010 pair. A couple of singles... No pairs - did a national salvage search and found several i could get for 625 each... I really like the front viewable turn signal on the mirrors - but not that much...Originally Posted by verneyboy
I purchased a set of eBay for $550 for the pair , got the local auto electrician to sortOut the wiring only took him an hour they were 2010 ls 460 I fitted them to my
2008 ls 600 hl
Regards Vern