Help with identifying a plug and a wire in the engine bay
#1
Driver School Candidate
Thread Starter
Help with identifying a plug and a wire in the engine bay
While i was changing spark plugs on the LS, i noticed a plug near the intake snorkel thing and a snapped off red wire.
anyone know what this does? Is the wire from the plug or is it completely unrelated?
anyone know what this does? Is the wire from the plug or is it completely unrelated?
#2
Moderator
Might be the Ignition Noise filter for the Right bank coils.
Does the AM radio reception seem weak, or noisy?
Does the AM radio reception seem weak, or noisy?
#3
Instructor
Do you have a check engine light on? I know the VVT sensor is a single wire sensor in that general area. The sensor is threaded into the valve cover. When mine was disconnected it threw a code within a few seconds of the engine running.
#4
Lexus Champion
As 2KHarrier said, the red wire goes to the Noise Filter. You have 2 of these noise filters (see circled in red below)...
The replacement connectors are shown on the electrical schematic below...
Part number for these connectors (N1 and N2)...
The replacement connectors are shown on the electrical schematic below...
Part number for these connectors (N1 and N2)...
Last edited by rkw77080; 09-29-18 at 01:25 PM.
#5
Driver School Candidate
Thread Starter
cool, thanks guys, looks like i'll just reattach the wire to the plug. I never noticed the am/fm reception issue but maybe that's because i never heard it "good" before.
The following users liked this post:
2KHarrier (09-30-18)
#6
Moderator
Glad I can still be of assistance!
#7
Moderator
https://www.clublexus.com/forums/ls-...ml#post8015152
Thread
Thread Starter
Forum
Replies
Last Post
amusing
LS - 3rd Gen (2001-2006)
2
07-25-17 02:54 PM