Hey Guyz ...Hope u all doing good

i just wanted to inquire about the rims which i purchased now that is

http://www.workwheelsusa.com/product...ry=25&wheel=63

as you can see in the link its 19 inch and i have a 2005 model lexus ls430 ultra luxury package and they are running on 17's at the moment and i wana swap them with 19's ...

Do i need to change anything of the car as the rim size what i am running on is 17 inch OEM and i would like to put on 19 inch work wheels euroline as seen in the above link ...

Would there be a problem like fender inner cover being hit by the tire ??

Please help me out...appreciate it

 

you bought it and now you have question? just contact the dealer you bought it from they should be able to help you out.

 

If you keep to OEM width, and the wheels are 45 offset, then shouldn't be an issue as long as lug pattern are size too. As REV-01 said... YOU BOUGHT, THEN YOU ASK ?!?!?!? ha ha.

As for the size itself, 19" typically fit fine. People are running 22s on their LS430, but they've had fender bent though.

 

yes bro u r right on it i just wanted to inquire ask 4 ur views

well we have alot of expert workshops down here in dubai

I am gettin them from a friend so doesnt matter much REv

 

Do you know the wheel width & offset? That is what dictates if they fit with or without modification.

 

then just ask your friend lol....

 

you need to give us more detail on the wheels like what are the width and offset? and what kind of tires size are you want to run on them?

 

Guys, lets remain on topic here.

diplomacyk,

Providing wheel width and/or offset can help those with knowledge on wheel fitment provide you with better information to assist you.

 

BRo here are the details on the offset of the 19inch

http://www.workwheelsusa.com/media/w...0DH%20Spec.pdf

 

??? which width and offsets YOU have??

 

I really dont know bro i will take pics and see if u guyz can make out

 

i still don't know the purpose of this thread.

you bought new dh wheels and are you having issues? if you are then just talk to the dealer that sold them to you.

or

you want to buy new/used dh wheels and want to figure out what fitment is good?

or

is this one of those cl teaser thread where you will post a lip size and have people guess the fitment?

 

are you just a complete moron or do you only play one on CL ^ ^ ^ ?? obviously we need one or two more variables to answer the original question. end of story.

 

There are a few widths listed here, and we cannot just guess which ones you have. In order for anyone to answer your question, we need all the variables so we can help. We are not here to guess potential widths.

No one can eye the width of the wheel by looking at a picture of one over the Internet. There should be stamps on each work wheel (and almost every other one out there) indicating size and sometimes offset.

So for the second time, please post all the information needed, otherwise we cannot assist you with your fitment question.