GS3Tek

iTrader: (8)

If anyone can help, I would greatly appreciate it.
I'm not familiar with the LS sizing.

For the rear, what size tire is recommended without any fender trimming?

19x10, +41 offset, fat set up. Would 275/35 rub?

Car might not be lowered.

anotherLS

iTrader: (9)

you're gonna be fine bro lowered on not!

GS3Tek

iTrader: (8)

Thank you for your help.

I have the 285 already on and it seemed like it was going to touch the fenders.

blacksc400

iTrader: (4)

so you are putting 19' on and not lowering it???
How does it look?

SH212

lol PICS!!!!

please???

i wanna see what 19'' would look with out lowering it, i have 20's lined up but would like to see 19''

denroll

What are the largest sizes that fit without fender mods? I'm looking to move up to 19s with a 285 or 295 out back. How much is involved in modding the fenders? Is a 265 a good fit for the front?

anotherLS

iTrader: (9)

it depends what wheelsize and offset you looking at doing? and are you lowering the car or not?

everything needs to be inputted before anyone can help u out

denroll

Car is lowered and wheels would either be19 or 20 inchers, 8.5" front, 10" rear. 35mm/43mm front/rear offset. I will not be stretching the tires.

anotherLS

iTrader: (9)

thats a fine offset for the LS430 no need for fender mods id run a 245/35-20 and 275/35 or 285/30-20 on the rear

i dunno why you wanna run a 265 in front? biggest ive seen on a 8.5 is a 255/35-20

denroll

Maybe I'd got with a 9" up front. Don't know yet. Still just hunting for ideas.

anotherLS

iTrader: (9)

just buy my chrome 20's $750.00!

denroll

Not a fan of chrome wheels.

GS3Tek

iTrader: (8)

Sorry for the confusions everyone.
I didn't take the pictures on stock height with my 19s. After seeing that it's going to touch the fenders, I took them off right away.

I have my 19" zaubers for sale and someone was asking about them.
He mentioned about not lowering his car and if the 285s will still touch the fenders.

So for the LS, it will fit with 275s as anotherLS advised

I have the UL and lowered already.
I had a change of heart on the wheels and want to go with the AME FX or AX, 5 spokes or full face

Right now, I lowered it by adjusting the sensors on the oem 18"s, with about fingers front and back.
I'll get pictures eventually when I make an introduction

I6turbo

iTrader: (1)

I would not go ANY wider than 245 on the front unless you're willing to put up with a *good bit* of tramlining. And no wider than 8.5". IMO, the looks aren't worth screwing up the on-the-road feel. Even the 8.5s and 245s will deterioriate it a bit.