did u find a fix or not?

 

what would happen if I dont use the rod anymore?

 

just my guesss: very bad things

 

For some reason after i adjusted the links i cant get the car to even out. driver side is about 2 finger gaps and pass side is about 1 finger gap. I tried to raise the passanger side up, I adjusted it all the way up but it doesnt seem to be raising.

Any tips and tricks you guys can give me?

 

Will this work for a 2002 LS430 UL?

 

yes the ASC680 will work for the 01-06, just uses different harnesses for 01-03 and 04-06

 

Gonna bring back another old thread instead of making a new one. So what is the difference between the 663 and the 680 ? The 680 has "Speed Sensitive Automatic Height Control" is that the only difference ? I have a 2001 UL LS430 , and the 663 will work for me but if the 680 is that much better and it works for the 2001 then I am interested in knowing why. If i use it just to go down a few inches and get rid of most of the gap when I run 20's , will it be easier on the stock suspension ? Or is it hard on the factory bags no matter what setting I ride around on ? I am not interested in ever going low enough for the tires to be tucked

 

I don't think it's much harder on your factory bags, but with the DataSystems Controller it does go up and down slower than aftermarket. I know the 680 has the lead that connects to the speed height under the glovebox in the 04-06, most people go without hooking it up though from what I've noticed. I didn't hook mine up when I installed my 680, which I am selling now. Hope this helps.

 

Thanks for the reply . I am basically looking to drop a few inches and leave it be for the most part. Maybe once in a blue moon at a meet or a show , I might put it all the way down.

 

Anyone looking to purchase a data controller 680, i should be selling mine shortly with a harness for an 04-06 LS. Only selling because Im going full aftermarket air, thanks

 

Deejayrock, I pm'd you

 

PM'd you as well DeeJay...

 

thanks guys, responded back