Those with a datasystem controller...

Reply Subscribe

Thread Tools

Search this Thread

Mar 17, 2007 | 12:56 PM

racinstyle

Thread Starter

Lexus Test Driver

Joined: Dec 2004

Posts: 1,123

Likes: 12

From: z

Those with a datasystem controller...

I just installed this thing yesterday, and now today on my instrument panel it keeps blinking the "High Height" warning. Is this normal? I was set at 2 all the way around, and it doesnt look high at all. Is there something I can do to fix this?

Mar 17, 2007 | 03:09 PM

FLIPPU

Lexus Test Driver

Joined: Sep 2005

Posts: 833

Likes: 1

From: HI

Did you check the "HIGH" button?? Also make sure the connections are TIGHT, it can damage a lot more if you have loose connections...

What year car?

Mike

Mar 17, 2007 | 03:23 PM

racinstyle

Thread Starter

Lexus Test Driver

Joined: Dec 2004

Posts: 1,123

Likes: 12

From: z

Quote:

Originally Posted by FLIPPU

Did you check the "HIGH" button?? Also make sure the connections are TIGHT, it can damage a lot more if you have loose connections...

What year car?

Mike

car is an 01...all connections are tight. What if I were to reset the battery or something? Will that get rid of it?

Mar 17, 2007 | 04:35 PM

Dr. Jekyll

Lexus Champion

iTrader: (1)

Joined: Dec 2006

Posts: 1,742

Likes: 35

From: Hawaii

Mine flashes on once in awhile then goes away. I can't really say because I don't stare at the monitor and it only briefly lights up then disappears. For all I know it does this all the time.

Mar 17, 2007 | 04:42 PM

racinstyle

Thread Starter

Lexus Test Driver

Joined: Dec 2004

Posts: 1,123

Likes: 12

From: z

Quote:

Originally Posted by Dr. Jekyll

Mine flashes on once in awhile then goes away. I can't really say because I don't stare at the monitor and it only briefly lights up then disappears. For all I know it does this all the time.

Exactly what it is doing in my car :-/

Mar 17, 2007 | 05:22 PM

lscs

Driver School Candidate

Joined: Nov 2006

Posts: 3

Likes: 0

From: hi

mine flashes twice- once initially and again about twenty seconds later

Mar 20, 2007 | 02:21 AM

Celsius

Lead Lap

iTrader: (1)

Joined: Sep 2005

Posts: 450

Likes: 1

From: Beaverton, OR

It will only flash when you change the height settings and should disappear. You have to remember that the controller is "tricking" the factory computer into adjusting the height.