LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

98 LS400 Wiper Blade

Thread Tools
 
Search this Thread
 
Old 03-02-19, 06:55 PM
  #31  
Losiracer2
Racer
 
Losiracer2's Avatar
 
Join Date: Sep 2008
Location: Chandler, AZ
Posts: 1,277
Received 210 Likes on 171 Posts
Default

Originally Posted by spuds
Thats pretty good,toyota branded??
they weren't the carbon refills, those were probably much more, but these are the rubber replacements.
Old 12-30-21, 12:43 AM
  #32  
Sherl
Advanced
Thread Starter
 
Sherl's Avatar
 
Join Date: May 2018
Location: TX
Posts: 649
Received 63 Likes on 55 Posts
Default

Originally Posted by Losiracer2
So, I have something to add. I WAS able to go to Toyota and purchased 24" and 16" inserts that were the refillable type. But here's the catch, they have to be the rubber inserts and not the carbon inserts that they'll typically want to sell you. They have two different kinds. These ones are slimmer and fit inside the housings perfectly and even clip in and lock into the end. They were about $5 each.



B400 is discontinued. Get G600 and trim to requirement?
Old 12-31-21, 04:43 PM
  #33  
YODAONE
Lexus Champion
 
YODAONE's Avatar
 
Join Date: Nov 2014
Location: CALIFORNIA
Posts: 3,257
Received 407 Likes on 346 Posts
Default Use lexus wiper arms and refills

Use Lexus wiper blade arms and refills...

The aftermarket stuff does not cut it.

Comparing LS400 OEM to aftermarket wiper arms, the OEM mechanism features additional pivots points/segments which to better follow the contour and curvature of swept area of windshield.

My LS400 came with aftermarket stuff and could not replace it fast enough.

Lexus wiper blade inserts are high quality graphite-impregnated rubber and designed to eliminate noise/chatter/judder while sweeping across windshield.

The original blade inserts and arms work in unison and are specific to curvature of LS400 windshield.

My rubber inserts are replaced annually...

Not worth saving $10 using aftermarket.


Old 01-03-22, 02:32 PM
  #34  
paulo57509
Instructor
 
paulo57509's Avatar
 
Join Date: Nov 2007
Location: CA
Posts: 837
Received 203 Likes on 178 Posts
Default

Originally Posted by Sherl
B400 is discontinued. Get G600 and trim to requirement?
You can try it but you need to make sure that 1) the rubber squeegee and 2) the metal backing strips are positively retained in the blade frame. No. 1 should be no problem but No. 2, maybe not so much.

Original blade ends:





The following users liked this post:
Sherl (08-08-22)
Old 01-03-22, 09:51 PM
  #35  
Stroock639
Lead Lap
 
Stroock639's Avatar
 
Join Date: Apr 2012
Location: Long Island
Posts: 4,846
Received 232 Likes on 176 Posts
Default

Originally Posted by paulo57509
You can try it but you need to make sure that 1) the rubber squeegee and 2) the metal backing strips are positively retained in the blade frame. No. 1 should be no problem but No. 2, maybe not so much.
yea i just replace the insert and swap those little pieces of metal that keep the rubber taut, if they're clean they do a perfect job
Old 08-30-22, 11:10 AM
  #36  
Sherl
Advanced
Thread Starter
 
Sherl's Avatar
 
Join Date: May 2018
Location: TX
Posts: 649
Received 63 Likes on 55 Posts
Default

Originally Posted by Stroock639
yea i just replace the insert and swap those little pieces of metal that keep the rubber taut, if they're clean they do a perfect job
Just to give a heads up the G600 didn't work for the 16" as the width is different. I think the stock refill is around 5mm. Gotta figure out a refill that works.
Old 08-30-22, 11:34 AM
  #37  
Sherl
Advanced
Thread Starter
 
Sherl's Avatar
 
Join Date: May 2018
Location: TX
Posts: 649
Received 63 Likes on 55 Posts
Default

Originally Posted by Losiracer2
I got Lexus 24" and 16" blades and they work perfectly. I'm not sure if these are the type that you can replace the inserts on though. But a year after I bought them and they're still streak free. They even have the Lexus emblem on there as well.








fits the curve of the window well too and the 24" driver blade has good coverage all the way to the top of the windshield



Do you happen to have the 16" and 22"/24" wiper part numbers? Somehow the images are deleted


Edit: nvm. The images appear when you click them and go to Photobucket
Old 08-30-22, 02:53 PM
  #38  
paulo57509
Instructor
 
paulo57509's Avatar
 
Join Date: Nov 2007
Location: CA
Posts: 837
Received 203 Likes on 178 Posts
Default

FWIW Department -

Toyota parts diagrams occasionally don't make sense. It appears that the number for just the rubber squeegee is the same as for the squeegee and the inserts. I think this is due to consolidation of part numbers; place the order and you should get more or less what you're looking for.

Squeegee:
  • Item No. 85214A; P/N 85214-50090 - RT
  • Item No. 85214B; P/N 85214-40070 - LT
Squeegee w/insert
  • Item No. 85213A; P/N 85214-50090 - RT
  • Item No. 85223A; P/N 85214-40070 - LT
Blade:
  • Item No. 85212A; P/N 85212-50070 - RT
  • Item No. 85222A; P/N 85222-50030 - LT
These numbers still "appear" to be available: https://parts.lexusofroseville.com/a...01.html#85213A

Last edited by paulo57509; 08-30-22 at 03:46 PM.
Old 08-30-22, 03:46 PM
  #39  
aptoslexus
Advanced
 
aptoslexus's Avatar
 
Join Date: Mar 2014
Location: California
Posts: 583
Received 79 Likes on 65 Posts
Default

I'm pretty happy with the Trico Exact Fit wiper blades. They work excellently and are quite inexpensive.
Old 08-30-22, 03:49 PM
  #40  
Sherl
Advanced
Thread Starter
 
Sherl's Avatar
 
Join Date: May 2018
Location: TX
Posts: 649
Received 63 Likes on 55 Posts
Default

Originally Posted by aptoslexus
I'm pretty happy with the Trico Exact Fit wiper blades. They work excellently and are quite inexpensive.

Just reorder the 16 Lexus blade. It was 20 shipped from a overstock vendor. The set was like 45. But I got refill on another just need the 16.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
psls400
LS - 1st and 2nd Gen (1990-2000)
34
09-04-19 07:42 PM
jckevin
LS - 1st and 2nd Gen (1990-2000)
14
11-06-18 06:59 AM
bouellet
LS - 1st and 2nd Gen (1990-2000)
9
03-02-15 12:25 PM
rainsong27
LS - 1st and 2nd Gen (1990-2000)
2
11-02-09 10:19 AM
selkirk
LS - 1st and 2nd Gen (1990-2000)
6
03-15-09 11:56 AM



Quick Reply: 98 LS400 Wiper Blade



All times are GMT -7. The time now is 04:34 PM.