Ignition key, not coming out when engin turned off
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2014
Location: texas
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Ignition key, not coming out when engin turned off
Once I turn the engine off I cannot pull out the key. Only way to get it out is to turn on, crank engine for split second and turn off and pull it out. Any one come across this issue? Ideas why this is happening?
#3
or try keeping your foot on the brake.. .had a 95, that developed this problem.
It was weird, as long as I kept the foot on the brake after shifting, then I could easily remove the key.
Then I took my foot of the brake.
It was weird, as long as I kept the foot on the brake after shifting, then I could easily remove the key.
Then I took my foot of the brake.
#5
Moderator
Sounds like that the shift lock control relay or the key lock solenoid itself is not working properly. If those are OK, then you need to check the signal RSPD coming from the ECU. The signal RSPD can be checked at the pin 4 of the shift lock control relay.
Thread
Thread Starter
Forum
Replies
Last Post
Tomepot
LS - 1st and 2nd Gen (1990-2000)
6
02-01-19 02:27 PM
rizdana
LS - 1st and 2nd Gen (1990-2000)
6
03-07-18 08:33 PM