2000 LS400 problem with steering wheel adjust
Rookie
Joined: Dec 2013
Posts: 74
Likes: 0
From: Hungary
Unfortunately lubricant does not help. 
Two motor factory defect. OE regulation two motor change.Both motor available modified OE number.
Lexus improved a both motor, but very expensive.
OE description, see annex.
Solution would be aftermarket or remanufactured motor.I could not find a web
Two motor factory defect. OE regulation two motor change.Both motor available modified OE number.
Lexus improved a both motor, but very expensive.
OE description, see annex.
Solution would be aftermarket or remanufactured motor.I could not find a web
Lead Lap
Joined: Mar 2012
Posts: 591
Likes: 4
From: Landrum, SC
part number #8923250041 should fix my problem. not really worth it to me since my steering wheel is in a good spot for me . $277.71 through Sewell.
Last edited by dengman; Jan 10, 2014 at 04:26 PM.
Rookie
Joined: Dec 2013
Posts: 74
Likes: 0
From: Hungary
A both motor is very expensive. I like tilt and telescopic function, but I can not find cheap motor on web. OE motor about 100.000 HUF(500$)/piece in Hungary.
What are you going to do now? Two motor re-replace?
What are you going to do now? Two motor re-replace?
Driver School Candidate
Joined: Sep 2018
Posts: 22
Likes: 0
From: CA
Mine failed with the column in the UP position.
Used vise grips to turn it and lower the column until it was where I like to drive it and haven't thought about it since.
Sux that these fail. I believe the programming to completely raise and then lower the wheel at every key insert wears the tilt motor unnecessarily.
Oh well.
Used vise grips to turn it and lower the column until it was where I like to drive it and haven't thought about it since.
Sux that these fail. I believe the programming to completely raise and then lower the wheel at every key insert wears the tilt motor unnecessarily.
Oh well.
Rookie
Joined: Jul 2018
Posts: 56
Likes: 3
From: 99 LS400 UCF21L
I would like to know a way to stop this system from working every single time I put the key in and out. In my LS400 works but obviously won't work forever.
Is this an ECU thing or can it be dissabled by removing a fuse?
Is this an ECU thing or can it be dissabled by removing a fuse?
unplug the motors and they will stop...
Last edited by billydpowe; Sep 7, 2018 at 05:00 PM. Reason: photo
Thread
Thread Starter
Forum
Replies
Last Post
hlovepenn
LS - 1st and 2nd Gen (1990-2000)
3
Jan 2, 2006 08:18 PM
