ignitor?????

Subscribe
May 23, 2010 | 07:04 PM
  #1  
Does a ignitor from a 98' ls400 fit on a 90'??????
Reply 0
May 24, 2010 | 12:50 AM
  #2  
98-00 dont have ignitors they're COP.
Reply 0
May 24, 2010 | 07:11 AM
  #3  
Quote: 98-00 dont have ignitors they're COP.
So 90'~97' are the same then?
Reply 0
May 24, 2010 | 02:56 PM
  #4  
no, but 95-97 may fit, but they are different in many ways.
Reply 0
May 24, 2010 | 02:59 PM
  #5  
Well i just need to know which years work with my 1990 ls400
Reply 0
May 24, 2010 | 05:12 PM
  #6  
Quote: Well i just need to know which years work with my 1990 ls400
1990-1992 for sure.

igniter, ls400, to 09/91 90-92 $597.99 $0.00 $420.63
Electrical - Ignition system - Distributor - igniter

So... find a donor from a '90-92 car.
Reply 0
May 24, 2010 | 06:24 PM
  #7  
Were is it located?? If the code that the car is showing is 14 then replacing the ignitor should solve the problem correct?
Reply 0
May 24, 2010 | 07:51 PM
  #8  
Quote: Were is it located?? If the code that the car is showing is 14 then replacing the ignitor should solve the problem correct?
on my '96 the ignitor is right by the front passenger side strut tower, under a plastic ventilated cover.

i can't tell you about pre-OBD II caveman blinking codes, I graduated from those a while ago and don't want to be reminded of them again
Reply 0
May 25, 2010 | 07:12 AM
  #9  
Quote: on my '96 the ignitor is right by the front passenger side strut tower, under a plastic ventilated cover.

i can't tell you about pre-OBD II caveman blinking codes, I graduated from those a while ago and don't want to be reminded of them again

Yeah the light blinks and you have to sit there and try to see if you could get what code is showing LOL JK bro.... i hate pre OBDII aswell lol...... Ill check that out...
Reply 0
Subscribe