Notices
LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Reasonable Cost? Transmission Pan Gasket Seal

Thread Tools
 
Search this Thread
 
Old Mar 5, 2009 | 09:39 PM
  #1  
margarita's Avatar
margarita
Thread Starter
Rookie
 
Joined: Sep 2007
Posts: 75
Likes: 0
From: ca
Default Reasonable Cost? Transmission Pan Gasket Seal

Is $375 a reasonable price for replacing a leaking trans pan gasket? The transmission fluid would be drained, not flushed. ls400 1st gen. thanks.
Reply
Old Mar 5, 2009 | 10:27 PM
  #2  
PureDrifter's Avatar
PureDrifter
BahHumBug
CL Folding 100,000
20 Year Member
Photogenic
Liked
iTrader: (10)
 
Joined: Aug 2004
Posts: 23,920
Likes: 111
From: California
Default

sounds a little high, shouldnt be more than $300 imho including the fluid at $65 an hour.
Reply
Old Mar 5, 2009 | 10:34 PM
  #3  
LiCelsior's Avatar
LiCelsior
Retired
CL Folding 500,000
15 Year Member
iTrader: (32)
 
Joined: May 2007
Posts: 12,364
Likes: 19
From: NY
Default

u can soooo easily do this in ur driveway...hell in the street also. cple bolts, some RTV sillicone, some new oil and ur straight.
Reply
Old Mar 6, 2009 | 06:29 AM
  #4  
cation's Avatar
cation
Rookie
 
Joined: Sep 2008
Posts: 86
Likes: 0
From: TN
Default

Yeah this can be done on your own for less than $20 provided you have the correct tools.

10mm socket, extension, socket wrench, and a torque wrench. Easy.
Reply
Old Mar 6, 2009 | 09:45 AM
  #5  
MEANDAFAKA's Avatar
MEANDAFAKA
Lead Lap
 
Joined: Aug 2008
Posts: 694
Likes: 1
From: Hawaii
Default

^exactly, i did mine in like an hours and a half. 20 dollars gasket and filter, and three bottles of tranny fluid. total cost=35 dollars ish.
Reply
Old Mar 6, 2009 | 01:03 PM
  #6  
margarita's Avatar
margarita
Thread Starter
Rookie
 
Joined: Sep 2007
Posts: 75
Likes: 0
From: ca
Default

Originally Posted by cation
Yeah this can be done on your own for less than $20 provided you have the correct tools.

10mm socket, extension, socket wrench, and a torque wrench. Easy.
yeah, that's what a thought after looking at that pictorial in lexls. doesn't look that much more complicated than changing engine oil (i've never done either). i would try this in a heartbeat, but no good place to do it. i've never jacked up a car in my life either, and would have to buy the tools, etc.

i will call around to get some other quotes...
Reply
Old Mar 6, 2009 | 01:21 PM
  #7  
cation's Avatar
cation
Rookie
 
Joined: Sep 2008
Posts: 86
Likes: 0
From: TN
Default

Originally Posted by margarita
yeah, that's what a thought after looking at that pictorial in lexls. doesn't look that much more complicated than changing engine oil (i've never done either). i would try this in a heartbeat, but no good place to do it. i've never jacked up a car in my life either, and would have to buy the tools, etc.

i will call around to get some other quotes...
Yeah try to shop around at a mom-n-pop type import shop that are familiar with working on Lexus automobiles. $300 for this job is WAAAYYY too high. I would expect you could get away with <$200.
Reply
Old Mar 6, 2009 | 01:46 PM
  #8  
LiCelsior's Avatar
LiCelsior
Retired
CL Folding 500,000
15 Year Member
iTrader: (32)
 
Joined: May 2007
Posts: 12,364
Likes: 19
From: NY
Default

where in cali are u?? see if anyone is willing to help u in the regional forums. just pay for lunch or dinner and a 6pack and im sure they'll do it.
Reply
Old Mar 6, 2009 | 09:15 PM
  #9  
nthach's Avatar
nthach
Lexus Champion
 
Joined: Oct 2003
Posts: 3,350
Likes: 6
From: California
Default

I could help you out if you're in the Bay Area, within reason.

The tranny pan on these is easy to pull, but if RTV silicone was used to seal it, it's a pain to break the seal.
Reply
Old Mar 6, 2009 | 09:17 PM
  #10  
margarita's Avatar
margarita
Thread Starter
Rookie
 
Joined: Sep 2007
Posts: 75
Likes: 0
From: ca
Default

Originally Posted by cation
Yeah try to shop around at a mom-n-pop type import shop that are familiar with working on Lexus automobiles. $300 for this job is WAAAYYY too high. I would expect you could get away with <$200.
Wow. i guess someone mistook me for a fool! Good thing I asked (here). Thanks!!
Reply
Old Mar 6, 2009 | 09:31 PM
  #11  
margarita's Avatar
margarita
Thread Starter
Rookie
 
Joined: Sep 2007
Posts: 75
Likes: 0
From: ca
Default

Originally Posted by nthach
I could help you out if you're in the Bay Area, within reason.

The tranny pan on these is easy to pull, but if RTV silicone was used to seal it, it's a pain to break the seal.
nice offer, thanks, but i'm in LA. i have a few other things i need to do, so can probably negotiate it down to a very reasonable amount with an indie mechanic (i have some leads). i can't believe i was quoted that high. maybe they made a mistake. oh well...
Reply
Old Mar 7, 2009 | 12:27 PM
  #12  
Vdog15's Avatar
Vdog15
Driver School Candidate
 
Joined: Jul 2007
Posts: 23
Likes: 0
From: CA
Default

Originally Posted by margarita
nice offer, thanks, but i'm in LA. i have a few other things i need to do, so can probably negotiate it down to a very reasonable amount with an indie mechanic (i have some leads). i can't believe i was quoted that high. maybe they made a mistake. oh well...
Im in LA also, in fact im about to do mine as I type this. So RTV instead of a gasket is what I see posted. Im not sure about the RTV, think I feel better with the gasket. Cant find one without getting a trans filter also.
Reply
Old Mar 7, 2009 | 02:54 PM
  #13  
margarita's Avatar
margarita
Thread Starter
Rookie
 
Joined: Sep 2007
Posts: 75
Likes: 0
From: ca
Default

Originally Posted by Vdog15
Im in LA also, in fact im about to do mine as I type this. So RTV instead of a gasket is what I see posted. Im not sure about the RTV, think I feel better with the gasket. Cant find one without getting a trans filter also.
you may as well change the filter while you are at it (if you are going with the gasket). several people have commented that RTV is really hard to remove.

i found a really great blog that shows step by step (realize you may not need any instruction) for changing out the fluid, and also how to non-machine flush. go to my other recent thread "transmission: drain or flush" (titled something like that) and the links are there.
Reply
Old Mar 7, 2009 | 10:58 PM
  #14  
jeffls400's Avatar
jeffls400
Rookie
 
Joined: Jul 2006
Posts: 53
Likes: 1
From: CA
Default

The Purolator filter (screen) kit comes with a high quality, reusable gasket. If you ever have to go back in there (for a solenoid replacement for example), it will make life easier that's for sure...the pan on mine was REALLY stuck on there with red RTV.
Reply
Old Mar 9, 2009 | 11:21 PM
  #15  
margarita's Avatar
margarita
Thread Starter
Rookie
 
Joined: Sep 2007
Posts: 75
Likes: 0
From: ca
Default

Originally Posted by margarita
nice offer, thanks, but i'm in LA. i have a few other things i need to do, so can probably negotiate it down to a very reasonable amount with an indie mechanic (i have some leads). i can't believe i was quoted that high. maybe they made a mistake. oh well...
I did get another quote from an independent shop (with certified Lexus mechanics) and they were significantly less. $150'ish. That's a very big difference in price. Pays to shop around. Even more interesting, is that I am now not convinced I HAVE a transmission leak. There is no fluid on the ground. There is no fluid on that y-connection behind the transmission pan (which would indicate blow back). I'll check again in the morning, but so far, nothing. The pan is oily all around, however, but isn't that the case more often than not? A few years ago, I was also advised to replace the gasket, and on my way out of the shop, one of the nicer mechanics pulled me off to the side and told me that that pan had 'seepage' not a leak, and that I really did not need to do a thing. And I didn't, and it's been fine all this time. No fluid loss whatsoever. Is the seepage worse? Probably, it's been years since I was first told of this! But the fact remains, if it's not yet a leak, I don't really have to do it. And as far as I can tell, if there isn't dripping onto the ground, or on the undercarriage parts behind the transmision, I don't have a leak. I have seepage. Thoughts?
Reply



All times are GMT -7. The time now is 10:48 PM.