RK's LS400 Thread
#1
Driver
Thread Starter
Join Date: May 2008
Location: CA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
RK's LS400 Thread
Relatively new here, started out wanting to build a Previa for the wife, so we bought one and did the initial maintenance and addressed the problem spots. Essentially we put about $2000 into a van we bought for $2600, planned on putting in a set of used canovers from another member on this board and then she saw nizzan4u2nv's Black LS400 and quickly changed her mind. We then began our search for a Black on Black LS400, we found one that met the criteria from randyboy on this forum and made the purchase. Soon after we started searching for rims & suspension. Wald GS had a set of Carlsson 2/6's for sale on the CL board and after striking a deal we brought them home, bought a set of nankang tires from PerformancePlus and had them mounted locally. A few days later my new Megan coilovers showed up. I wanted to make sure the rims would fit correctly before tinkering with the suspension so I installed them today, I'm pretty happy with the fit & look, and its nice having something a little less common. I had to roll the rear fenders a bit (likely because I chose to run a tire I didnt have to stretch) but they are running fin now. I plan on doing the coilovers next week if we dont head out of town for the holiday weekend. Since I hate threads without pics, here are some to start off with:
we did some small mods like clear corners, JDM one piece headlights, 6000k HID BiXenon upgrade, new grille, and JDM RCR tails from LOTC with the red sections tinted
After rims & tires installed on today:
... it settled down after backing it out, so its not as 4x4 as it looks in this pic
Nice & flush...
Specs: Carlsson 2/6 rims:19x8.5 (+28) & 19x10 rims (+35), Nankang 235/35ZR19 front, 275/30ZR19 rear
Next... coilovers & tint!
we did some small mods like clear corners, JDM one piece headlights, 6000k HID BiXenon upgrade, new grille, and JDM RCR tails from LOTC with the red sections tinted
After rims & tires installed on today:
... it settled down after backing it out, so its not as 4x4 as it looks in this pic
Nice & flush...
Specs: Carlsson 2/6 rims:19x8.5 (+28) & 19x10 rims (+35), Nankang 235/35ZR19 front, 275/30ZR19 rear
Next... coilovers & tint!
#3
Driver
Thread Starter
Join Date: May 2008
Location: CA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
wow RK there she is, and she is looking mighty fine!!! You ever think or murdering out the center of the rims by having them painted black or pearl black? Maybe to much but the BLACK on BLACK theme is HOT! Thanks for the pics, can't wait for the coil-overs. Hey how much and where did you get them JDM one piece lights from???
#9
Driver
Thread Starter
Join Date: May 2008
Location: CA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
got the lights from e-bay, actually won them for less than $50 for the pair... Yes I thought about powdercoating the centers but couldnt figure out what to do with the caps, dont know if it would look goofy with silver caps in black centers
coilovers on:
just kidding, someone on VIP did a photochop, but this is what I'm shooting for...
coilovers on:
just kidding, someone on VIP did a photochop, but this is what I'm shooting for...
Last edited by RocKrawler; 06-30-08 at 07:12 AM.
#11
Driver
Thread Starter
Join Date: May 2008
Location: CA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts