Bulb changing instructions
Thread Starter
Driver School Candidate
Joined: Nov 2005
Posts: 14
Likes: 0
From: California
Bulb changing instructions
Hello all,
Can anyone tell me where I might be able to find instructions on how to change the bulbs for low beam, high beam, and the fog lights for 2005 GS300? Thanks.
choirgeek
Can anyone tell me where I might be able to find instructions on how to change the bulbs for low beam, high beam, and the fog lights for 2005 GS300? Thanks.
choirgeek
high beam, just twist from behind
low beam, if halogen, just twist... if hid, read instructions at top of this forum
fog, take out housing by unscrewing the two black screws right by the inner side of the foglight, and twist
low beam, if halogen, just twist... if hid, read instructions at top of this forum
fog, take out housing by unscrewing the two black screws right by the inner side of the foglight, and twist
Thread Starter
Driver School Candidate
Joined: Nov 2005
Posts: 14
Likes: 0
From: California
Thanks rominl, got my first set of Silverstars today (9005) and replaced my high beams; all is well. :-) Can't wait for my two other sets of 9006s so I can replace my low beams and fogs.
By the way, can anyone tell me what the little bulbs inside with, and next to the high beam bulbs are? It lights up when I turn on my low beams but are regular yellow lights... Kinda detracts from the white light look! Any ideas?
By the way, can anyone tell me what the little bulbs inside with, and next to the high beam bulbs are? It lights up when I turn on my low beams but are regular yellow lights... Kinda detracts from the white light look! Any ideas?
Driver School Candidate
Joined: Oct 2005
Posts: 4
Likes: 0
From: CA
Hi all,
I'm a newbie here. I want to upgrade my OEM HID bulbs (4300K) to 6000K (Philips). However, my car comes with AFS (RX330 2005). So when I upgrade to the 6000K HID bulbs, will that affect the AFS autoleveling ? And I will appreciate it if you can show me the instruction. Thanks a lot.
I'm a newbie here. I want to upgrade my OEM HID bulbs (4300K) to 6000K (Philips). However, my car comes with AFS (RX330 2005). So when I upgrade to the 6000K HID bulbs, will that affect the AFS autoleveling ? And I will appreciate it if you can show me the instruction. Thanks a lot.
Trending Topics
ClubLexus Stories
Celebrating Lexus & Toyota from Around the Globe
Lexus NX 350h: A Fuel-Sipping Secret Hot Hatch???
Michael S. Palmer
5 Best & 5 Worst Lexus Daily Drivers
Joe Kucinski
Top 5 Hottest Lexus & Toyotas in 2026 (Hardest To Buy)
Brett Foote
2026 Lexus IS 350 F Sport Review: The Last of Its Kind Still Rocks
Michael S. Palmer
Top 10 Most Confusing Things Lexus Has Ever Done!
Joe Kucinski
2026 Lexus ES Review: Lexus Re-Embraces Founding Principles
Michael S. Palmer
10 Lexus Bargains That are Cheaper Than a New Toyota RAV4
Joe Kucinski
8 Weirdest Things Lexus Has Ever Built
Verdad Gallardo
10 Lexus Designs That Have Aged Like Fine Wine
Verdad Gallardo
Thread Starter
Driver School Candidate
Joined: Nov 2005
Posts: 14
Likes: 0
From: California
Hi rominl,
Nevermind my last question about changing the Polarg m4s... Found the instructions on the forum... Thanks anyway!
By the way, if anyone else had this question, the thread for changing the bulbs can be found here https://www.clublexus.com/index.php/...ew/2104/1/171/
Nevermind my last question about changing the Polarg m4s... Found the instructions on the forum... Thanks anyway!
By the way, if anyone else had this question, the thread for changing the bulbs can be found here https://www.clublexus.com/index.php/...ew/2104/1/171/
Last edited by choirgeek; Dec 16, 2005 at 05:53 PM.
Polarg M6
Originally Posted by uclaed
I have these, they look great! These are the brightest 18W!
Thread
Thread Starter
Forum
Replies
Last Post