Notices
Lexus Audio, Video, Security & Electronics
Sponsored by:

How to hook up a new headunit in the SC

Thread Tools
 
Search this Thread
 
Old Jul 21, 2005 | 08:30 PM
  #16  
blksc300mt's Avatar
blksc300mt
Driver
 
Joined: Feb 2005
Posts: 165
Likes: 1
From: FL
Default

no prob...just pm me ur email address....
Reply
Old Jul 21, 2005 | 10:01 PM
  #17  
boobstar's Avatar
boobstar
Lexus Test Driver
 
Joined: Jun 2004
Posts: 1,074
Likes: 0
From: Florida
Default

stupid me. kidperu@adelphia.net what would you suggest i do, i am looking to do an aftermarket head unit with an aftermarket 5 channel amp and all aftermarket speakers and subs. what would be the easiest and sound the best???
Reply
Old Jul 26, 2005 | 04:16 PM
  #18  
jacques's Avatar
jacques
Thread Starter
Pole Position
 
Joined: Mar 2004
Posts: 217
Likes: 0
From: Minnesota
Default

Edit: Figured it out

I'll outline the procedure so others if anyone needs it in the future, I ended up not needing the 70-1761.:

1. First remove the stock Headunit using these directions here .

2. Take the Metra 70-8112 and wire it into the wires coming out of the new headunit. You will have to cut off the 4 RCA's from the 70-8112 and splice them into the wires of the headunits. The colored wire behind the plug is pos, and the wire surrounding that is the neg.

3. Connect the 70-8112's plug into the stock plug (only one will fit), your other stock plugs will go unused.

4. Connect your antenna and the RCA's for your Sub into the new unit

5. The new HU should fit into the stock cage. Just slide it in and use the old screws that held the stock HU into the cage

6. Put everything you pulled apart in step one back together

7. Pop the trunk and pull out your amp and changer, you wont need these anymore

8. Take the two harness that were in the old amp and splice the wires as follows:
This is from plug A (input) the bigger one to plug B (output) the smaller one

Red (A) to Light Green (B) =FR+
Blue (A) to Pink (B) =FL+
Brown (A) to Red (B) =RR+
White (A) to Black (B) =RL+
Black (A) to White, Blue, Violet and Yellow = Connects all the (-) to the ground

Your speakers are now connected to the new HU Leave all the other wires alone, you won't need them.

9. You can also remove your stock sub amp in the rear deck. Run your RCA's from the deck directly to your new sub amp. If you tapped the purple wire on the stock amp for a remote turn on, use the blue/white wire on the other side of the harness instead.

10. Sell your stock components in the CL classifieds for $$$

With this procedure the power antenna won't work, I'm sure there's a way to hook it up but I'm going with a hideaway amplified fm antenna instead and shaving the stock, so no worries.

Last edited by jacques; Jul 26, 2005 at 09:30 PM.
Reply
Old Jul 27, 2005 | 12:03 AM
  #19  
blksc300mt's Avatar
blksc300mt
Driver
 
Joined: Feb 2005
Posts: 165
Likes: 1
From: FL
Default

i forget which wire it is...but my power antenna works just fine with the aftermarket hu. actually...i think you just need to use the antenna wire on the metra harness. and good write-up...you explained it better than i could
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Behemoth7
GS - 2nd Gen (1998-2005)
16
Oct 11, 2014 04:33 PM
mktbully
Lexus Audio, Video, Security & Electronics
14
Jun 27, 2004 11:45 AM
Pianoman72
Lexus Audio, Video, Security & Electronics
8
Apr 24, 2003 04:34 PM
ape907
Lexus Audio, Video, Security & Electronics
3
Apr 8, 2002 01:31 PM




All times are GMT -7. The time now is 06:27 PM.