Emergency Roadside Toolkit - Long Post
asong1 - Please don't remove your post. I find it comprehensive, and other future members should have access to it. You have done a lot of work that may help others
Please leave it up.
Also, I, for one, will miss you if you choose not to post anymore😪 Please hang around
Lou
Also, I, for one, will miss you if you choose not to post anymore😪 Please hang around

Lou
asong1 - Please don't remove your post. I find it comprehensive, and other future members should have access to it. You have done a lot of work that may help others
Please leave it up.
Also, I, for one, will miss you if you choose not to post anymore😪 Please hang around
Lou
Also, I, for one, will miss you if you choose not to post anymore😪 Please hang around

Lou
Good luck to Everone!
asong1 - I learnt a lot about comma ai / open pilot from your posts but I do see them all gone now (and thanks to your PM on the subject, appreciate it). Also your post on Mark Levinson system tuning which I earmarked to replicate when I get mine soon. Very sad to see these gone (I did not even make a copy of it). You have made very valuable contributions in the forum and such information will be useful to members like me or any future members. Please do not delete these... appreciate if you can restore them.
Last edited by CaryCatch; Jan 6, 2025 at 03:25 PM.
asong1 - I learned a few things and appreciate you added a source to buy the items.
-Did not know there was a Digital Torque Meter: https://www.harborfreight.com/12-in-...ter-58706.html Gonna research that.
-Did not know there was a 1/2" Breaker Bar adaptor for the Scissor Jack. Who likes turning the jack w that crooked handle (which is why I got a floor jack, but if I need the scissors, well....).
-Ordered the 6-inch sockets. Just today had to look for a ratchet extension. And wrapping the sockets w electrical tape is a good idea, because I read the plastic sleeve eventually breaks.
All this to say, Iron sharpens iron. Thanks.
Rob
-Did not know there was a Digital Torque Meter: https://www.harborfreight.com/12-in-...ter-58706.html Gonna research that.
-Did not know there was a 1/2" Breaker Bar adaptor for the Scissor Jack. Who likes turning the jack w that crooked handle (which is why I got a floor jack, but if I need the scissors, well....).
-Ordered the 6-inch sockets. Just today had to look for a ratchet extension. And wrapping the sockets w electrical tape is a good idea, because I read the plastic sleeve eventually breaks.
All this to say, Iron sharpens iron. Thanks.
Rob
Last edited by rmbrewer; Jan 6, 2025 at 03:56 PM.
I found your suggestions helpful in every respect asong1 and glad you've left this up. It's a great service you're providing for us that no little about mechanical/safety issues, or have only been with their LC for a short time. I too hope you hang around and don't waste any more time (or emotional energy) on those who criticise or add nothing positive to your thread (s).
Thread
Thread Starter
Forum
Replies
Last Post
Phenomenon101
LS - 4th Gen (2007-2017)
8
Jan 5, 2025 05:05 AM
peterls
LS - 1st and 2nd Gen (1990-2000)
41
May 21, 2020 11:33 AM
TMaxxTim
IS - 2nd Gen (2006-2013)
15
Aug 18, 2018 11:07 PM












