What's compatible?
#1
Driver School Candidate
Thread Starter
Join Date: May 2012
Location: Fl
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
What's compatible?
Hi Guys,
I think I've found a source for some parts I need, but I'm not too sure what'll fit and what won't.
Does anyone know, off hand, what years have interchangeable interiors with a 2010 ISC? (350, if it matters)
I need to know if the following pieces are interchangeable from an older coupe to a newer convertible.
Center console shifter bezel (the piece whe the shifter pokes through.
Door pulls (waterfall interior pieces you grab to shut the door from inside
Speedo gauge bezel
Arm rest and arm rest base ring
Thanks!!
Alan
I think I've found a source for some parts I need, but I'm not too sure what'll fit and what won't.
Does anyone know, off hand, what years have interchangeable interiors with a 2010 ISC? (350, if it matters)
I need to know if the following pieces are interchangeable from an older coupe to a newer convertible.
Center console shifter bezel (the piece whe the shifter pokes through.
Door pulls (waterfall interior pieces you grab to shut the door from inside
Speedo gauge bezel
Arm rest and arm rest base ring
Thanks!!
Alan
#2
I use "..." ....... a lot
iTrader: (14)
All of these are IIRC based on the sedan I had prior, but....
Center console shifter bezel (the piece whe the shifter pokes through.
Yes
Door pulls (waterfall interior pieces you grab to shut the door from inside
The silver grab handle itself maybe, but the door panel itself is a no....the doors are bigger)
Speedo gauge bezel
Don't know what you mean by the bezel.....I believe the cluster housing and all is the same size, however the gauges themselves are different
Arm rest and arm rest base ring
Yes I believe the arm rest is the same....don't know what you mean by base ring
Center console shifter bezel (the piece whe the shifter pokes through.
Yes
Door pulls (waterfall interior pieces you grab to shut the door from inside
The silver grab handle itself maybe, but the door panel itself is a no....the doors are bigger)
Speedo gauge bezel
Don't know what you mean by the bezel.....I believe the cluster housing and all is the same size, however the gauges themselves are different
Arm rest and arm rest base ring
Yes I believe the arm rest is the same....don't know what you mean by base ring
#3
Driver School Candidate
Thread Starter
Join Date: May 2012
Location: Fl
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks.
The speedo cluster bezel is the ouster-most piece. If you look at your gauges on the dash, you can see there's a plastic ring just outside the glass that almost appears to hold the glass in place.
The armrest base ring is the trim pieces directly under the armrest. If I'm not mistaken, it's the part the armrest physically closes against.
The door pull handle seems to be the hardest pieces to come by.
The speedo cluster bezel is the ouster-most piece. If you look at your gauges on the dash, you can see there's a plastic ring just outside the glass that almost appears to hold the glass in place.
The armrest base ring is the trim pieces directly under the armrest. If I'm not mistaken, it's the part the armrest physically closes against.
The door pull handle seems to be the hardest pieces to come by.
#4
Racer
iTrader: (7)
Join Date: Jun 2007
Location: California - Bay Area
Posts: 1,305
Likes: 0
Received 3 Likes
on
3 Posts
Haha.. Hi Alan,
I'm pretty sure everything is interchangeable except for the driver and passenger window switch plates. 06-08 is different for sure.. i know they changed in 09+.. but i dont know if it is different between the 4door and vert.
I'm pretty sure everything is interchangeable except for the driver and passenger window switch plates. 06-08 is different for sure.. i know they changed in 09+.. but i dont know if it is different between the 4door and vert.
#5
I use "..." ....... a lot
iTrader: (14)
Thanks.
The speedo cluster bezel is the ouster-most piece. If you look at your gauges on the dash, you can see there's a plastic ring just outside the glass that almost appears to hold the glass in place.
The armrest base ring is the trim pieces directly under the armrest. If I'm not mistaken, it's the part the armrest physically closes against.
The door pull handle seems to be the hardest pieces to come by.
The speedo cluster bezel is the ouster-most piece. If you look at your gauges on the dash, you can see there's a plastic ring just outside the glass that almost appears to hold the glass in place.
The armrest base ring is the trim pieces directly under the armrest. If I'm not mistaken, it's the part the armrest physically closes against.
The door pull handle seems to be the hardest pieces to come by.
I think the silver "garnish" part of the pull handle is the same....but the door panel itself definitely is not.
C'mon Jonny, you're supposed to remember this stuff from your IS350Jonny days
Last edited by mikes rx; 06-01-12 at 05:55 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Flufferiou
2Gen GS430 / 400/ 300 Classifieds (98-05)
9
08-16-05 01:33 PM