It is just plug and play!
You only have to drill one hole (hole saw is included with the cam).

 

Hole for that camera is really big... 22mm... Why don't you choose another type, maybe this one:

http://www.lightinthebox.com/it/120-...timately_buy_8

The size of the camera is about the same but this one is like the one in the guide (with a small hole). I'm afraid about the sealing...

 

I finally bought the rearview camera, THIS ONE.
Do you have the exact drilling location? And did you follow exactly all the instructions posted in the previous page (including removing the license plate and rear lights)? Isn't it possible to drill the hole in the overlay directly on the car without dismount everything?

 

Be sure the camera supports 6V!
You have to follow the instructions, I made one a hole in the overlay only and routed the cable via a hole behind the light unit.

 

What??? 6v??? Why 6?
+6V & -6V are not the same as ground & +12Vdc? My camera is 12V...

Otherwise I'll connect the power supply to the reverse gear light and not to that connector, and use this one just for the video in

 

[QUOTE=inventcar;8702927]Rear camera for Lexus IS 3 (250, 300, 300h from 04.2013 year production)http://inventcar.ru/kamera-toyota-lexus[/QUOTE)
Do You have this instruction as this link is not valid any note .. brgds

 

Does anyone have this instruction as link is not valid any note. All best.

 

Help needed. Link with insrtuction is not valid. Does any one have this instruction?

 

Dear Inventcar,
Do You know where can I faund this instruction as link is not valid anymore.....
Thanks for Your help