Daytime running lights/High Beam issue
Thread Starter
4th Gear
Joined: Aug 2013
Posts: 4
Likes: 1
From: NY
Daytime running lights/High Beam issue
Hi guys,
My driver side DRL burned out so I replaced both sides(driver and passenger). I don't know what's the issue but after replacing it, the driver side still not working. I checked all fuses, engine compartment fuse box and under the dashboard..
I cant figured out what could be the reason.
Any suggestions?
Thanks.
My driver side DRL burned out so I replaced both sides(driver and passenger). I don't know what's the issue but after replacing it, the driver side still not working. I checked all fuses, engine compartment fuse box and under the dashboard..
I cant figured out what could be the reason.
Any suggestions?
Thanks.
Lead Lap
Joined: Mar 2017
Posts: 415
Likes: 28
From: PA
I'd only suggest that maybe the replacement is bad. Get a volt meter and make sure you have voltage to the DRL connector that is still out. If not, I don't have much more to add. If you do have voltage, the connector may not be making proper contact to the replacement.
Thread
Thread Starter
Forum
Replies
Last Post
Rattfinkk
LS - 4th Gen (2007-2017)
44
Sep 28, 2024 07:57 PM
