Notices
IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

IS250 Bogging... no CEL

Thread Tools
 
Search this Thread
 
Old May 14, 2016 | 11:11 PM
  #1  
is250san's Avatar
is250san
Thread Starter
Driver School Candidate
 
Joined: Feb 2016
Posts: 38
Likes: 0
From: oregon
Default IS250 Bogging... no CEL

So recently my is250 started to bog while at a full stop. It happened a few times a couple weeks ago but i didn't think anything was wrong because when i started stepping on the gas, it stopped. Tonight, i noticed the rpm idled at 500 rpm and my car started shaking a little, so i rev it up and it stopped. Check engine light is NOT on. Anyone here experienced this? could it be MAF? beginning of carbon build up?
Reply
Old May 14, 2016 | 11:42 PM
  #2  
Bkhectic's Avatar
Bkhectic
Driver
 
Joined: Feb 2015
Posts: 146
Likes: 2
From: New York
Default

What year is your car?
Reply
Old May 14, 2016 | 11:43 PM
  #3  
is250san's Avatar
is250san
Thread Starter
Driver School Candidate
 
Joined: Feb 2016
Posts: 38
Likes: 0
From: oregon
Default

Originally Posted by Bkhectic
What year is your car?
2007 is250 84k
Reply
Old May 14, 2016 | 11:45 PM
  #4  
bangdangvn's Avatar
bangdangvn
Advanced
15 Year Member
 
Joined: Aug 2007
Posts: 684
Likes: 3
From: CO
Default

Symptoms sound like carbon build up
Reply
Old May 14, 2016 | 11:50 PM
  #5  
is250san's Avatar
is250san
Thread Starter
Driver School Candidate
 
Joined: Feb 2016
Posts: 38
Likes: 0
From: oregon
Default

I'm really hoping it isn't. If it is... without CEL on, how do I go calling the dealership without getting hassled?
Reply
Old May 15, 2016 | 01:13 PM
  #6  
Bkhectic's Avatar
Bkhectic
Driver
 
Joined: Feb 2015
Posts: 146
Likes: 2
From: New York
Default

Yea sounds like carbon build up. Hopefully not and if you still have warranted take it asap so they can inspect it. I have a 2012 and so far nothing but a quick shake up on red lights for about 1-2 seconds once in a while that's got me wondering if I will be experiencing the same issue in the future. I checked with the dealer and they say there's no recalls on that or anything else on my yea model.
Reply
Old May 15, 2016 | 02:14 PM
  #7  
is250san's Avatar
is250san
Thread Starter
Driver School Candidate
 
Joined: Feb 2016
Posts: 38
Likes: 0
From: oregon
Default

Originally Posted by Bkhectic
Yea sounds like carbon build up. Hopefully not and if you still have warranted take it asap so they can inspect it. I have a 2012 and so far nothing but a quick shake up on red lights for about 1-2 seconds once in a while that's got me wondering if I will be experiencing the same issue in the future. I checked with the dealer and they say there's no recalls on that or anything else on my yea model.
Yeah what you described is exactly whats been happening to my car. Except last night, the rpm sat at 500 rpm. Well I'll call the dealership tomorrow and hopefully they will help me out.
Reply
Old May 16, 2016 | 11:58 AM
  #8  
is250san's Avatar
is250san
Thread Starter
Driver School Candidate
 
Joined: Feb 2016
Posts: 38
Likes: 0
From: oregon
Default

I just got off the phone with Kuni Lexus of Portland, i explained to the service lady what's been going on and that it sounds like the beginning of carbon build. She said we'll have to run a diagnostic on my car and go from there. Then she told me it will cost me $140 an hour to do the diagnostic. I think I'm gonna wait a little...
Reply
Old May 16, 2016 | 12:55 PM
  #9  
is250san's Avatar
is250san
Thread Starter
Driver School Candidate
 
Joined: Feb 2016
Posts: 38
Likes: 0
From: oregon
Default

well i also contacted Lexus corporate to see if they can help but it appears my warranty has expired exactly a month ago. Ain't that some...... i guess i'll have to buy some seafoam or whatever and hopefully it helps.
Reply
Old May 17, 2016 | 08:11 AM
  #10  
UniSlayEX's Avatar
UniSlayEX
Lexus Test Driver
 
Joined: Sep 2010
Posts: 1,553
Likes: 3
From: Californ-i-a
Default

If you're partial to a dealership performing services, I would look at your local Toyota dealership. Nine times out of ten they can perform the same service and it will end up being cheaper because of the lower labor rate.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Marcose250
IS - 2nd Gen (2006-2013)
5
Nov 19, 2020 01:13 PM
LanceK
IS - 2nd Gen (2006-2013)
2
Jan 29, 2019 07:30 PM
Kb24greate
IS - 2nd Gen (2006-2013)
1
Apr 4, 2018 10:06 AM
trippy
IS - 2nd Gen (2006-2013)
25
Aug 22, 2016 09:22 PM
vicsis250
IS - 2nd Gen (2006-2013)
13
Sep 23, 2012 09:23 AM




All times are GMT -7. The time now is 10:03 PM.