LED Board for front dome light

Subscribe
Mar 9, 2011 | 09:31 PM
  #1  
i removed these led board from my previous car, they still work fine, i tried on other places as well and they are good, but they just don't work when i put them at the front dome light. i have a bigger one that put at the rear dome light with no problem. does anybody know why? Thanks!

i have a 2010 IS250

Reply 0
Mar 9, 2011 | 10:08 PM
  #2  
Did you make sure the dome lights are activated, by pressing On/Off or toggling the "Door" button?
Reply 0
Mar 9, 2011 | 10:19 PM
  #3  
Or a blown fuse. Try stick a stock bulb back in and see if its putting out any power
Reply 0
Mar 9, 2011 | 11:29 PM
  #4  
Quote: Did you make sure the dome lights are activated, by pressing On/Off or toggling the "Door" button?
Yes, i tried toggle the on/off and door button, but only the rear dome light goes on, not the front
Reply 0
Mar 9, 2011 | 11:32 PM
  #5  
Quote: Or a blown fuse. Try stick a stock bulb back in and see if its putting out any power
i tried the stock bulb and the other led i bought from ebay, they work fine...i am wondering if the front dome light only support something that has lower wattage?
Reply 0
Subscribe