Front: 19X8.5 +30 - 226/35/19
Rear: 19X9.5 +35 - 265/30/19

Lowered on Tein S-Tech. Any modifications needed?

 

(fixed.)

based on your proposed wheel specs and current ride height, you should be fine without fender modifications.

 

you will be fine. might rub a little when you hit a bump but thats all

 

Anyone know how much less inner clearance that our is250 rwd can have before needing a spacer? found a set of rims, but there's gonna be 14mm less inner clearance front and back

 

you will be ok with those

 

19x8.5 +22 front with 215/35/19
19x10.5 +22 rear with 265/30/19 or 245/35/19

Lowered on F-sports, no fender mods save a little heat gun. I'm only really worried about the rear.

 

you might be able to get away with no fender modifications given your ride height.

but given those wheel and tire specs, it's best that you give some consideration and plan for fender modifications.

on a slightly related note, i think i know what wheels you're looking at. my advice is, do it and don't look back.

 

x114.3 Rim Width: 8.5 & 9.5
Hub Bore: 60.2 Rim Diameter: 19
Offset: +38 & +45

Will these rub on tien s techs or eibachs?

Im in a 06 250 rwd

Thanks in advance

 

you shouldnt rub with 225/35 and 245/35

 

I am looking at running a 19x8.5 - 19x9.5 setup on my 06 250 (rwd) offsets seem pretty conservative at +35 F - +40 R...

My question is what size tire would you recommend on these wheels- i was considering 235/35/19 and 275/30/19 -- the car will be dropped on H&R springs. I found a great deal on 225/35/19 and 245/35/19 and am also considering these as well...


hoping to avoid any rubbing issues and achieve an almost flush look while still maintaining the cars practicality - this is my daily, i already have one car with aggressive offsets, stretched tires and slammed on coils - i dont need two useless vehicles - LOL!!

 

20x9 Front +15 Offset
20x10 Rear +20 Offset
5x114.3 Bolt Pattern
2.5" Front Lip, 4.5" Rear Lip


would they fit?

 

235/35-19 + 265/35-19 (or 265/30-19) should be fine, though this is (imo) a conservative recommendation.

 

depends on how much fender work you're willing to do.

 

Speaking of fender work, Any precautions we should take before shaving the fenders? Is it fine with that seam?

 

i shaved the rears all the way down. DO NOT SHAVE YOUR FRONTS, ROLL THEM FLAT.