Fuse problem
#1
Driver School Candidate
Thread Starter
Join Date: Jan 2007
Location: NY
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Fuse problem
Recently, the interior dome lighting on my 2006 IS250 AWD stopped working, due to a broken fuse. This happened once before, and after replacing the ATM-10 fuse, the lighting worked again with no problems.
This time around however, when I put a new ATM-10 fuse in, it breaks immediately. I hear a very quiet pop (which I assume is the fuse breaking). I've tried six or seven fuses now with no luck.
Does anyone know why this is happening and how I might be able to fix it?
Thanks.
This time around however, when I put a new ATM-10 fuse in, it breaks immediately. I hear a very quiet pop (which I assume is the fuse breaking). I've tried six or seven fuses now with no luck.
Does anyone know why this is happening and how I might be able to fix it?
Thanks.
#3
You have a direct short to ground in the circuit. Have you modified the lighting in any way? If not get it into a shop and have them fix it...shouldn't be to hard to track down the source of the short from looking at the wiring diagram.
#4
Driver School Candidate
Thread Starter
Join Date: Jan 2007
Location: NY
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
I have stock interior lighting; the only mod I have ever made is adding Tanabe NF210 springs to drop the car.
Direct short to ground? How would that have happened?
Thanks for your help.
Direct short to ground? How would that have happened?
Thanks for your help.
#5
Just one of those things, just always keep in mind that if it has ****, tires or likes to @#$@ your going to have problems with it sooner or later
#6
Lexus Champion
Thread
Thread Starter
Forum
Replies
Last Post
fbrown1
GX - 1st Gen (2004-2009)
2
02-25-14 10:19 AM