Your're correct! I tried to delete my prior post on this thread, but deleting is disabled. Should I just delete all of the text?

Thanks for keeping the info current.

 

Can you please add the model year of each photo? thanks and most helpful.

 

Not sure if this utility has been share before but it is an awesome way to see the exact dimensions of any given tire vs. another.

https://www.tacomaworld.com/tirecalc...0r17-255-75r17

 

Very nice stance! What lift you running to make all that work? I have Nitto Ridge Grappler 295 70 17 on my FJ with rubbing at lock and slight rubbing on body mount with a 2 inch OME.

 

Great comment, I added years to those who share them on their public profiles, only one was not listed.

Thanks, I added to the top of the page, I always use this one: https://tiresize.com/comparison/

 

What DRIVES ME CRAZY is all this energy to showcase various tire sizes ... with ABSOLUTELY no wheel reference when running non-OEM wheels. Without knowing the Wheel Width and Wheel Offset and Lift (if applicable), proclaiming "no rubbing" for a given tire size is totally worthless information.

 

Thanks ASE,

The point of this thread is not to describe every wheel / tire / offset and possible combination that would fit a GX460, but rather tire sizes using ONLY stock wheels and stock suspension. This was outlined in the opening thread.

I agree though, without specifics on wheel / tire size / suspension its useless to begin a discussion on the topic. This being said in keeping with my opening statement of Stock Suspension / Wheels the claims of "no rubbing" are perfectly valid as each vehicle I listed above are following these two critical protocols!

I will add the wheel and offset info to the thread of a stock wheel though!

Thanks!

 

Kenda Klever LT275 70 18 will these fit on stock 2013 (w/ stock wheels) with some trimming? I don't want to BMC they have 33.43 diameter

I plan on doing Dobinson or Ironman lift but it will be spring or summer before this is done and my tires are shot now.

I want to go as big as I can so they look OK when lift is done. Or do you think I have to go with LT275 65 18 a 32.32 diameter??

 

see post #1: member desioc has that size, needs some trimming of the fender to to fit!

 

Yeah thanks I went back and looked. I might give that size a try I am willing to trim.

 

Hello OP! I spent a nice chunk of time in South Boston. Now a few towns south. Mind sharing where you got your tires?

 

Wow, looks so much better without the door ding trim.

 

I’ve noticed the new ones are coming without it. While I always like the clean look, I far prefer the ding free look. My 2013 has absolutely zero dings or dimples.

 

Hi Overland,

I bought them (and pretty much every tire the past 10 years) from Discount Tire Direct, happened to buy them on a 100 dollars off 4 tires day, I believe they came out to around 150 a tire plus around 150 to install.

 

I believe this particular rig is a 2020 (Lexus removed the door trim from 2020's and beyond) I agree though looks very clean without the door trim!