I've got the drivers memory seat programmed for my wife (1) and myself (2). There have been a number of times recently where her memory (1) has taken on the settings of mine (2). That leaves me with two presets of the same settings and her hunting for the perfect position again.

Is there something I am unknowingly doing to cause this? When I get in I just single press the 2. Nothing more, nothing less.

Thanks.

 

Make sure that you have the memory setting linked to each key fob correctly, sounded you have both key fobs linked to the same memory setting. When you performed link, make sure there is only one key fob inside the car.

 

Seems like we may be experiencing this also. Not sure how having the fobs both programmed to the same setting would overwrite the other saved setting. Per the manual, programming a button may be accomplished by either holding the "Set" button and then pressing one of the two number buttons, OR, Pressing the "Set" button and then, within 3 seconds, pressing one of the two number buttons. It may be possibly Mrs. Wonderful is inadvertently pressing the "Set" button sometimes before pressing her preset button, which would overwrite her preset. I'll have to see how I can test this (maybe taping something over the set button temporarily). If you find out any more, please post it here.

***UPDATE*** After reviewing the memory seat function operation with my wife, the mysterious memory overwrite issues have completely disappeared and not returned in over a month and a half.