Bskrilla, looking good. Is that stock suspension?

 

20x9+15 225/30& 20x10.5 +25 255/30 or 245/30 will be aggressive on this car, this will require fender mods

[Hi =KLouDxNinE;6161297]Hey guys i just picked up an 06 gs and i was thinking about getting some Vossen 20's VVS-CV1.. I want an aggressive offset but dont know what offset to run with... Can you guys help me out? I also wanted to put i'm also going to roll my fenders and drop a couple of inches depending on my size tire i want to run with..[/QUOTE]

 

lkapimp216 when you say fender mods is it going to be okay with rolled fender or would i need to do more like having my fenders shaved or pulled?

 

The rears are hard to just roll cause of the double lip it's best to shave if you don t want to dimple the fender and have to do body work. The fronts are easier to roll however rolling can still lead to paint damage if not done properly. I am shaved all the way around. Thus does however weaken the integrity of the fender. I have not had any issues myself with this method and have been shaved for over a 1 1/2 year. Just be sure you paint the raw metal and I also sprayed 3m rubberized undercoating spray.

 

Thanks that is some very helpful information!!

 

did u find out the name?im trying to get the name of those rims too

 

If your asking about the rims in post #502 they are Venerdi Cl-010. good luck trying to get them stateside

 

i agree. shaving is the way to go on these cars. i sadly went the other way the first go around and it was a nightmare. like lka said the most important part after shaving is to touch up the raw edges to prevent future paint cracking/peeling.

 

^^&rust!!!!!

 

If i shave my fenders i need to find the right shop to do it right around the DFW area..

 

or if you read enough, you can do it in your own garage with belt sander like i did

 

blue tape a dremel tool and grinding wheel, touch up painy and 3m rubberized undercoating spray

 

dremel! man, how many tip did you go through?

 

Just did mine for the 2nd time, needed a little more clearence. I used the grinder to start, then the dremel to smooth down. One tip worked fine.

 

This is so fresh! Hellaflush!!!